| Message ID | 7db1786220cb6948bbddcecda17147908d25f91c.1685801691.git.chunkeey@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v1,1/3] ARM: MR26: MR32: remove bogus nand-ecc-algo property | expand |
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index bca39b30ace8..e0ad79fac7f4 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -186,16 +186,19 @@ ports { port@0 { reg = <0>; label = "poe"; + phy-mode = "rgmii"; }; port@5 { reg = <5>; label = "cpu"; ethernet = <&gmac0>; + phy-mode = "internal"; fixed-link { speed = <1000>; - duplex-full; + full-duplex; + pause; }; }; };
fixes the "duplex-full" typo, adds phy-modes for the internal switch and the attached PHY-chip. This also includs adding pause support for the internal cpu port. | ports:port@5:fixed-link: 'oneOf' conditional failed, | {'speed': [[1000]], 'duplex-full': True} is not of type 'array' | 'duplex-full' does not match any of the regexes: 'pinctrl-[0-9]+' | ports:port@5: 'phy-mode' is a required property | ports:port@5: Unevaluated properties are not allowed Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)