| Message ID | 20230604121223.9625-7-stefan.wahren@i2se.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: dts: bcm283x: Improve device-trees and bindings | expand |
On Sun, Jun 04, 2023 at 02:12:19PM +0200, Stefan Wahren wrote: > The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi > files accordingly and fix the dtbs_check warning: > > pwm@7e20c000: #pwm-cells:0:0: 3 was expected > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > arch/arm/boot/dts/bcm2711.dtsi | 2 +- > arch/arm/boot/dts/bcm283x.dtsi | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi > index 83745672a120..239db6927a02 100644 > --- a/arch/arm/boot/dts/bcm2711.dtsi > +++ b/arch/arm/boot/dts/bcm2711.dtsi > @@ -278,7 +278,7 @@ pwm1: pwm@7e20c800 { > clocks = <&clocks BCM2835_CLOCK_PWM>; > assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; > assigned-clock-rates = <10000000>; > - #pwm-cells = <2>; > + #pwm-cells = <3>; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > index c9c52a19ef3b..2ca8a2505a4d 100644 > --- a/arch/arm/boot/dts/bcm283x.dtsi > +++ b/arch/arm/boot/dts/bcm283x.dtsi > @@ -416,7 +416,7 @@ pwm: pwm@7e20c000 { > clocks = <&clocks BCM2835_CLOCK_PWM>; > assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; > assigned-clock-rates = <10000000>; > - #pwm-cells = <2>; > + #pwm-cells = <3>; > status = "disabled"; > }; Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Best regards Uwe
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 83745672a120..239db6927a02 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -278,7 +278,7 @@ pwm1: pwm@7e20c800 { clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clock-rates = <10000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index c9c52a19ef3b..2ca8a2505a4d 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -416,7 +416,7 @@ pwm: pwm@7e20c000 { clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clock-rates = <10000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; };
The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi files accordingly and fix the dtbs_check warning: pwm@7e20c000: #pwm-cells:0:0: 3 was expected Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/boot/dts/bcm2711.dtsi | 2 +- arch/arm/boot/dts/bcm283x.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)