@@ -199,6 +199,9 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
struct qcom_smd_rpm *rpm;
int ret;
+ if (!rpdev->dev.of_node)
+ return -EINVAL;
+
rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
if (!rpm)
return -ENOMEM;
@@ -230,38 +233,18 @@ static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
of_platform_depopulate(&rpdev->dev);
}
-static const struct of_device_id qcom_smd_rpm_of_match[] = {
- { .compatible = "qcom,rpm-apq8084" },
- { .compatible = "qcom,rpm-ipq6018" },
- { .compatible = "qcom,rpm-ipq9574" },
- { .compatible = "qcom,rpm-msm8226" },
- { .compatible = "qcom,rpm-msm8909" },
- { .compatible = "qcom,rpm-msm8916" },
- { .compatible = "qcom,rpm-msm8936" },
- { .compatible = "qcom,rpm-msm8953" },
- { .compatible = "qcom,rpm-msm8974" },
- { .compatible = "qcom,rpm-msm8976" },
- { .compatible = "qcom,rpm-msm8994" },
- { .compatible = "qcom,rpm-msm8996" },
- { .compatible = "qcom,rpm-msm8998" },
- { .compatible = "qcom,rpm-sdm660" },
- { .compatible = "qcom,rpm-sm6115" },
- { .compatible = "qcom,rpm-sm6125" },
- { .compatible = "qcom,rpm-sm6375" },
- { .compatible = "qcom,rpm-qcm2290" },
- { .compatible = "qcom,rpm-qcs404" },
- {}
+static const struct rpmsg_device_id qcom_smd_rpm_id_table[] = {
+ { .name = "rpm_requests", },
+ { /* sentinel */ }
};
-MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
+MODULE_DEVICE_TABLE(rpmsg, qcom_smd_rpm_id_table);
static struct rpmsg_driver qcom_smd_rpm_driver = {
.probe = qcom_smd_rpm_probe,
.remove = qcom_smd_rpm_remove,
.callback = qcom_smd_rpm_callback,
- .drv = {
- .name = "qcom_smd_rpm",
- .of_match_table = qcom_smd_rpm_of_match,
- },
+ .id_table = qcom_smd_rpm_id_table,
+ .drv.name = "qcom_smd_rpm",
};
static int __init qcom_smd_rpm_init(void)
There is an ever growing list of compatibles in the smd-rpm.c driver. A fallback compatible would help here but would still require keeping the current list around for backwards compatibility. As an alternative, let's switch the driver to match the rpmsg_device_id instead, which is always "rpm_requests" on all platforms. Add a check to ensure that there is a device tree node defined for the device since otherwise the of_platform_populate() call will operate on the root node (/). Similar approaches with matching rpmsg_device_id are already used in qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- drivers/soc/qcom/smd-rpm.c | 35 +++++++++-------------------------- 1 file changed, 9 insertions(+), 26 deletions(-)