diff mbox series

[2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660

Message ID 20230604061421.3787649-2-alexeymin@postmarketos.org
State Accepted
Commit 10b6fec2c8c99b5d1ccbcd070da1fc8e96da0046
Headers show
Series [1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible | expand

Commit Message

Alexey Minnekhanov June 4, 2023, 6:14 a.m. UTC
Snapdragon 630/660 modem subsystem is similar to one in MSM8998
and can almost reuse it's reset sequence.

Downstream sources call this q6v5 version "qdsp6v62-1-5" and its
code path has additional checks for QDSP6v55_BHS_EN_REST_ACK
status [2].

Inspiration is taken from Konrad Dybcio's work in [1], but reworked
to use common code path with MSM8996/8998, instead of completely
separate "if" block for SDM660.

[1] https://github.com/SoMainline/linux/commit/7dd6dd9b936dc8d6c1f1abe299e5b065c33741e8
[2] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/lavender-q-oss/drivers/soc/qcom/pil-q6v5.c#L393

Co-developed-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>

---

In his commit Konrad mentions that modem was unstable, but I don't
observe such behaviour on my device. Modem does not restart by itself,
and I could successfully enable ath10k Wi-Fi with this (and it was
also stable).

Also worth saying that in my initial tests just using qcom,msm8998-mss-pil
as-is, without separate resource struct and separate code paths for
SDM660, was also working fine. So I'm not sure if separate struct and
code path is even needed for sdm660.
---
 drivers/remoteproc/qcom_q6v5_mss.c | 54 ++++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio June 6, 2023, 12:54 p.m. UTC | #1
On 4.06.2023 08:14, Alexey Minnekhanov wrote:
> Snapdragon 630/660 modem subsystem is similar to one in MSM8998
> and can almost reuse it's reset sequence.
> 
> Downstream sources call this q6v5 version "qdsp6v62-1-5" and its
> code path has additional checks for QDSP6v55_BHS_EN_REST_ACK
> status [2].
> 
> Inspiration is taken from Konrad Dybcio's work in [1], but reworked
> to use common code path with MSM8996/8998, instead of completely
> separate "if" block for SDM660.
> 
> [1] https://github.com/SoMainline/linux/commit/7dd6dd9b936dc8d6c1f1abe299e5b065c33741e8
> [2] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/lavender-q-oss/drivers/soc/qcom/pil-q6v5.c#L393
> 
> Co-developed-by: Konrad Dybcio <konradybcio@gmail.com>
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
> 
> ---
> 
> In his commit Konrad mentions that modem was unstable, but I don't
> observe such behaviour on my device. Modem does not restart by itself,
> and I could successfully enable ath10k Wi-Fi with this (and it was
> also stable).
> 
> Also worth saying that in my initial tests just using qcom,msm8998-mss-pil
> as-is, without separate resource struct and separate code paths for
> SDM660, was also working fine. So I'm not sure if separate struct and
> code path is even needed for sdm660.
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 54 ++++++++++++++++++++++++++++--
>  1 file changed, 52 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 8e15e4f85de13..e270fc4798766 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -71,6 +71,7 @@
>  #define QDSP6SS_MEM_PWR_CTL		0x0B0
>  #define QDSP6V6SS_MEM_PWR_CTL		0x034
>  #define QDSP6SS_STRAP_ACC		0x110
> +#define QDSP6V62SS_BHS_STATUS		0x0C4
>  
>  /* AXI Halt Register Offsets */
>  #define AXI_HALTREQ_REG			0x0
> @@ -123,6 +124,7 @@
>  #define QDSP6v56_CLAMP_QMC_MEM		BIT(22)
>  #define QDSP6SS_XO_CBCR		0x0038
>  #define QDSP6SS_ACC_OVERRIDE_VAL		0x20
> +#define QDSP6v55_BHS_EN_REST_ACK	BIT(0)
>  
>  /* QDSP6v65 parameters */
>  #define QDSP6SS_CORE_CBCR		0x20
> @@ -130,6 +132,7 @@
>  #define QDSP6SS_BOOT_CORE_START         0x400
>  #define QDSP6SS_BOOT_CMD                0x404
>  #define BOOT_FSM_TIMEOUT                10000
> +#define BHS_CHECK_MAX_LOOPS             200
>  
>  struct reg_info {
>  	struct regulator *reg;
> @@ -250,6 +253,7 @@ enum {
>  	MSS_MSM8998,
>  	MSS_SC7180,
>  	MSS_SC7280,
> +	MSS_SDM660,
>  	MSS_SDM845,
>  };
>  
> @@ -700,7 +704,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>  	} else if (qproc->version == MSS_MSM8909 ||
>  		   qproc->version == MSS_MSM8953 ||
>  		   qproc->version == MSS_MSM8996 ||
> -		   qproc->version == MSS_MSM8998) {
> +		   qproc->version == MSS_MSM8998 ||
> +		   qproc->version == MSS_SDM660) {
>  
>  		if (qproc->version != MSS_MSM8909 &&
>  		    qproc->version != MSS_MSM8953)
> @@ -734,6 +739,19 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>  		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
>  		udelay(1);
>  
> +		if (qproc->version == MSS_SDM660) {
> +			for (i = BHS_CHECK_MAX_LOOPS; i > 0; i--) {
> +				if (readl_relaxed(qproc->reg_base + QDSP6V62SS_BHS_STATUS)
> +					& QDSP6v55_BHS_EN_REST_ACK)
> +					break;
> +				udelay(1);
> +			}
> +			if (!i) {
> +				dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n");
> +				return -ETIMEDOUT;
> +			}
> +		}
We could use something like readl_relaxed_poll_timeout instead!

I think it looks good otherwise!

Konrad
> +
>  		/* Put LDO in bypass mode */
>  		val |= QDSP6v56_LDO_BYP;
>  		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> @@ -756,7 +774,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>  				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
>  				i = 19;
>  			} else {
> -				/* MSS_MSM8998 */
> +				/* MSS_MSM8998, MSS_SDM660 */
>  				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
>  				i = 28;
>  			}
> @@ -2193,6 +2211,37 @@ static const struct rproc_hexagon_res sc7280_mss = {
>  	.version = MSS_SC7280,
>  };
>  
> +static const struct rproc_hexagon_res sdm660_mss = {
> +	.hexagon_mba_image = "mba.mbn",
> +	.proxy_clk_names = (char*[]){
> +			"xo",
> +			"qdss",
> +			"mem",
> +			NULL
> +	},
> +	.active_clk_names = (char*[]){
> +			"iface",
> +			"bus",
> +			"gpll0_mss",
> +			"mnoc_axi",
> +			"snoc_axi",
> +			NULL
> +	},
> +	.proxy_pd_names = (char*[]){
> +			"cx",
> +			"mx",
> +			NULL
> +	},
> +	.need_mem_protection = true,
> +	.has_alt_reset = false,
> +	.has_mba_logs = false,
> +	.has_spare_reg = false,
> +	.has_qaccept_regs = false,
> +	.has_ext_cntl_regs = false,
> +	.has_vq6 = false,
> +	.version = MSS_SDM660,
> +};
> +
>  static const struct rproc_hexagon_res sdm845_mss = {
>  	.hexagon_mba_image = "mba.mbn",
>  	.proxy_clk_names = (char*[]){
> @@ -2475,6 +2524,7 @@ static const struct of_device_id q6v5_of_match[] = {
>  	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
>  	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
>  	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
> +	{ .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss},
>  	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
>  	{ },
>  };
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 8e15e4f85de13..e270fc4798766 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -71,6 +71,7 @@ 
 #define QDSP6SS_MEM_PWR_CTL		0x0B0
 #define QDSP6V6SS_MEM_PWR_CTL		0x034
 #define QDSP6SS_STRAP_ACC		0x110
+#define QDSP6V62SS_BHS_STATUS		0x0C4
 
 /* AXI Halt Register Offsets */
 #define AXI_HALTREQ_REG			0x0
@@ -123,6 +124,7 @@ 
 #define QDSP6v56_CLAMP_QMC_MEM		BIT(22)
 #define QDSP6SS_XO_CBCR		0x0038
 #define QDSP6SS_ACC_OVERRIDE_VAL		0x20
+#define QDSP6v55_BHS_EN_REST_ACK	BIT(0)
 
 /* QDSP6v65 parameters */
 #define QDSP6SS_CORE_CBCR		0x20
@@ -130,6 +132,7 @@ 
 #define QDSP6SS_BOOT_CORE_START         0x400
 #define QDSP6SS_BOOT_CMD                0x404
 #define BOOT_FSM_TIMEOUT                10000
+#define BHS_CHECK_MAX_LOOPS             200
 
 struct reg_info {
 	struct regulator *reg;
@@ -250,6 +253,7 @@  enum {
 	MSS_MSM8998,
 	MSS_SC7180,
 	MSS_SC7280,
+	MSS_SDM660,
 	MSS_SDM845,
 };
 
@@ -700,7 +704,8 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 	} else if (qproc->version == MSS_MSM8909 ||
 		   qproc->version == MSS_MSM8953 ||
 		   qproc->version == MSS_MSM8996 ||
-		   qproc->version == MSS_MSM8998) {
+		   qproc->version == MSS_MSM8998 ||
+		   qproc->version == MSS_SDM660) {
 
 		if (qproc->version != MSS_MSM8909 &&
 		    qproc->version != MSS_MSM8953)
@@ -734,6 +739,19 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 		udelay(1);
 
+		if (qproc->version == MSS_SDM660) {
+			for (i = BHS_CHECK_MAX_LOOPS; i > 0; i--) {
+				if (readl_relaxed(qproc->reg_base + QDSP6V62SS_BHS_STATUS)
+					& QDSP6v55_BHS_EN_REST_ACK)
+					break;
+				udelay(1);
+			}
+			if (!i) {
+				dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n");
+				return -ETIMEDOUT;
+			}
+		}
+
 		/* Put LDO in bypass mode */
 		val |= QDSP6v56_LDO_BYP;
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
@@ -756,7 +774,7 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 				i = 19;
 			} else {
-				/* MSS_MSM8998 */
+				/* MSS_MSM8998, MSS_SDM660 */
 				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
 				i = 28;
 			}
@@ -2193,6 +2211,37 @@  static const struct rproc_hexagon_res sc7280_mss = {
 	.version = MSS_SC7280,
 };
 
+static const struct rproc_hexagon_res sdm660_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_names = (char*[]){
+			"xo",
+			"qdss",
+			"mem",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"gpll0_mss",
+			"mnoc_axi",
+			"snoc_axi",
+			NULL
+	},
+	.proxy_pd_names = (char*[]){
+			"cx",
+			"mx",
+			NULL
+	},
+	.need_mem_protection = true,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_SDM660,
+};
+
 static const struct rproc_hexagon_res sdm845_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_clk_names = (char*[]){
@@ -2475,6 +2524,7 @@  static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
 	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
+	{ .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss},
 	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
 	{ },
 };