diff mbox series

[11/14] arm64: dts: qcom: Add rpm-proc node for SMD platforms

Message ID 20230531-rpm-rproc-v1-11-e0a3b6de1f14@gerhold.net
State Accepted
Commit 091efd56330ff17f7fb45ca0c635338ab37e0a35
Headers show
Series None | expand

Commit Message

Stephan Gerhold June 5, 2023, 7:08 a.m. UTC 
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi |   6 +-
 arch/arm64/boot/dts/qcom/msm8939.dtsi | 112 ++++++++++++-------------
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 136 +++++++++++++++---------------
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 152 +++++++++++++++++-----------------
 arch/arm64/boot/dts/qcom/msm8994.dtsi |  99 +++++++++++-----------
 5 files changed, 253 insertions(+), 252 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9494b6512d87..667748612d3e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -282,10 +282,10 @@  CLUSTER_PD: power-domain-cluster {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
+	rpm: remoteproc-rpm {
+		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
 
-		rpm {
+		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 0d9f8b951b66..f11d522586eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -240,6 +240,62 @@  pmu {
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	rpm: remoteproc-rpm {
+		compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8936";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clock-names = "xo";
+					clocks = <&xo_board>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8939-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -308,62 +364,6 @@  mba_mem: mba@8cb00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs1_mbox 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8936";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clock-names = "xo";
-					clocks = <&xo_board>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8939-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smp2p-hexagon {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 7d193a467819..4b2f02850a10 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -190,6 +190,74 @@  psci {
 		method = "smc";
 	};
 
+	rpm: remoteproc-rpm {
+		compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8953";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8953-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -263,74 +331,6 @@  rmtfs@f2d00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8953";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
-					clocks = <&xo_board>;
-					clock-names = "xo";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8953-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION>;
-						};
-
-						rpmpd_opp_ret_plus: opp2 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
-						};
-
-						rpmpd_opp_min_svs: opp3 {
-							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
-						};
-
-						rpmpd_opp_low_svs: opp4 {
-							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
-						};
-
-						rpmpd_opp_svs: opp5 {
-							opp-level = <RPM_SMD_LEVEL_SVS>;
-						};
-
-						rpmpd_opp_svs_plus: opp6 {
-							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
-						};
-
-						rpmpd_opp_nom: opp7 {
-							opp-level = <RPM_SMD_LEVEL_NOM>;
-						};
-
-						rpmpd_opp_nom_plus: opp8 {
-							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
-						};
-
-						rpmpd_opp_turbo: opp9 {
-							opp-level = <RPM_SMD_LEVEL_TURBO>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smp2p-adsp {
 		compatible = "qcom,smp2p";
 		qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 753b9a2105ed..6f856562923f 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -232,6 +232,82 @@  psci {
 		method = "smc";
 	};
 
+	rpm: remoteproc-rpm {
+		compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -346,82 +422,6 @@  wcnss_smp2p_in: slave-kernel {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8976";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
-					clocks = <&xo_board>;
-					clock-names = "xo";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8976-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION>;
-						};
-
-						rpmpd_opp_ret_plus: opp2 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
-						};
-
-						rpmpd_opp_min_svs: opp3 {
-							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
-						};
-
-						rpmpd_opp_low_svs: opp4 {
-							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
-						};
-
-						rpmpd_opp_svs: opp5 {
-							opp-level = <RPM_SMD_LEVEL_SVS>;
-						};
-
-						rpmpd_opp_svs_plus: opp6 {
-							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
-						};
-
-						rpmpd_opp_nom: opp7 {
-							opp-level = <RPM_SMD_LEVEL_NOM>;
-						};
-
-						rpmpd_opp_nom_plus: opp8 {
-							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
-						};
-
-						rpmpd_opp_turbo: opp9 {
-							opp-level = <RPM_SMD_LEVEL_TURBO>;
-						};
-
-						rpmpd_opp_turbo_no_cpr: opp10 {
-							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
-						};
-
-						rpmpd_opp_turbo_high: opp111 {
-							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smsm {
 		compatible = "qcom,smsm";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 5a7923d7c62a..6168d0aeff57 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -178,6 +178,56 @@  psci {
 		method = "hvc";
 	};
 
+	rpm: remoteproc-rpm {
+		compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8994-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -237,55 +287,6 @@  reserved@6c00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-			qcom,remote-pid = <6>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8994";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8994-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;