@@ -67,14 +67,14 @@ led-3 {
};
};
- eth0_power: fixedregulator@0 {
+ eth0_power: fixedregulator-0 {
compatible = "regulator-fixed";
regulator-name = "eth0_power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+ gpio = <&gpb 25 0>;
enable-active-high;
};
@@ -97,23 +97,23 @@ ir: ir {
gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
};
- wlan0_power: fixedregulator@1 {
+ wlan0_power: fixedregulator-1 {
compatible = "regulator-fixed";
regulator-name = "wlan0_power";
- gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+ gpio = <&gpb 19 0>;
enable-active-high;
};
- otg_power: fixedregulator@2 {
+ otg_power: fixedregulator-2 {
compatible = "regulator-fixed";
regulator-name = "otg_power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
+ gpio = <&gpf 15 0>;
enable-active-high;
};
};
The regulators don't have any "reg" property, and therefore shouldn't use an unit address in their node names. They also don't need to specify the GPIO_ACTIVE_LOW flag, which will be ignored anyway, as they are active-high. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/mips/boot/dts/ingenic/ci20.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)