diff mbox series

[v3,2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible

Message ID 20230604063032.365775-3-guptarud@gmail.com
State New
Headers show
Series Samsung Galaxy Express SGH-I437 Support | expand

Commit Message

Rudraksha Gupta June 4, 2023, 6:30 a.m. UTC
Adds qcom,usb-hs-phy-msm8960 compatible

Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Rudraksha Gupta June 6, 2023, 2:06 a.m. UTC | #1
On Sun Jun 4, 2023 at 3:23 AM EDT, Rob Herring wrote:
>
> On Sun, 04 Jun 2023 02:30:19 -0400, Rudraksha Gupta wrote:
> > Adds qcom,usb-hs-phy-msm8960 compatible
> > 
> > Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.example.dtb: phy: resets: [[4294967295, 10], [1, 0]] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.example.dtb: phy: reset-names:0: 'por' was expected
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.example.dtb: phy: reset-names: ['phy', 'por'] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230604063032.365775-3-guptarud@gmail.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
I see. Why is it off the latest rc1 and not off the latest commit?

>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
Thanks. I didn't see these errors as I was only looking for expressatt
binding errors.
Rudraksha Gupta June 6, 2023, 2:48 a.m. UTC | #2
On Sun Jun 4, 2023 at 6:30 AM EDT, Krzysztof Kozlowski wrote:
> On 04/06/2023 08:30, Rudraksha Gupta wrote:
> > Adds qcom,usb-hs-phy-msm8960 compatible
> > 
> > Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> > index aa97478dd016..63b6914993fe 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> > @@ -13,7 +13,9 @@ if:
> >    properties:
> >      compatible:
> >        contains:
> > -        const: qcom,usb-hs-phy-apq8064
> > +        items:
> > +          - const: qcom,usb-hs-phy-apq8064
> > +          - const: qcom,usb-hs-phy-msm8960
>
> I have no clue what you want to achieve here. You break the bindings.
When I added the USB node to the msm8960 dtsi file, I got similar
messages for the expressatt/cdp that Rob mentioned in his email reply:

phy: resets: [[25, 0]] is too short
phy: reset-names:0: 'phy' was expected
phy: reset-names: ['por'] is too short

I will send an updated patch soon that addresses this.

>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
>
> Best regards,
> Krzysztof
Sorry. I was only looking for expressatt errors/warnings and failed to
see the other errors/warnings in the sea of text.
Krzysztof Kozlowski June 6, 2023, 6:20 a.m. UTC | #3
On 06/06/2023 04:48, Rudraksha Gupta wrote:
ted patch soon that addresses this.
> 
>>
>> It does not look like you tested the bindings, at least after quick
>> look. Please run `make dt_binding_check` (see
>> Documentation/devicetree/bindings/writing-schema.rst for instructions).
>> Maybe you need to update your dtschema and yamllint.
>>
>> Best regards,
>> Krzysztof
> Sorry. I was only looking for expressatt errors/warnings and failed to
> see the other errors/warnings in the sea of text.

https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd016..63b6914993fe 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@  if:
   properties:
     compatible:
       contains:
-        const: qcom,usb-hs-phy-apq8064
+        items:
+          - const: qcom,usb-hs-phy-apq8064
+          - const: qcom,usb-hs-phy-msm8960
 then:
   properties:
     resets:
@@ -40,6 +42,7 @@  properties:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
           - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974
       - const: qcom,usb-hs-phy