| Message ID | 20230605100700.111644-1-dmantipov@yandex.ru |
|---|---|
| State | Superseded |
| Headers | show |
| Series | wifi: rtlwifi: remove misused flag from HAL data | expand |
> -----Original Message----- > From: Dmitry Antipov <dmantipov@yandex.ru> > Sent: Monday, June 5, 2023 6:07 PM > To: Ping-Ke Shih <pkshih@realtek.com> > Cc: Kalle Valo <kvalo@kernel.org>; linux-wireless@vger.kernel.org; Dmitry Antipov <dmantipov@yandex.ru> > Subject: [PATCH] wifi: rtlwifi: remove misused flag from HAL data > > Always rely on 'driver_is_goingto_unload' of 'struct rtl_hal' > and remove (presumably misused) 'driver_going2unload' from it. > > Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> [...]
Dmitry Antipov <dmantipov@yandex.ru> wrote: > Always rely on 'driver_is_goingto_unload' of 'struct rtl_hal' > and remove (presumably misused) 'driver_going2unload' from it. > > Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> > Acked-by: Ping-Ke Shih <pkshih@realtek.com> Patch applied to wireless-next.git, thanks. fef0f427f712 wifi: rtlwifi: remove misused flag from HAL data
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c index a8b5bf45b1bb..4ae8f69c64f9 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c @@ -1302,7 +1302,7 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); u8 u1btmp; - if (rtlhal->driver_going2unload) + if (rtlhal->driver_is_goingto_unload) rtl_write_byte(rtlpriv, 0x560, 0x0); /* Power save for BB/RF */ @@ -1323,7 +1323,7 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) rtl_write_word(rtlpriv, CMDR, 0x57FC); rtl_write_word(rtlpriv, CMDR, 0x0000); - if (rtlhal->driver_going2unload) { + if (rtlhal->driver_is_goingto_unload) { u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1)); u1btmp &= ~(BIT(0)); rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp); @@ -1345,7 +1345,7 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) /* Power save for MAC */ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS && - !rtlhal->driver_going2unload) { + !rtlhal->driver_is_goingto_unload) { /* enable LED function */ rtl_write_byte(rtlpriv, 0x03, 0xF9); /* SW/HW radio off or halt adapter!! For example S3/S4 */ diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h index 307e059ec8aa..a16b779080cb 100644 --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -1673,8 +1673,6 @@ struct rtl_hal { bool fw_clk_change_in_progress; bool allow_sw_to_change_hwclc; u8 fw_ps_state; - /**/ - bool driver_going2unload; /*AMPDU init min space*/ u8 minspace_cfg; /*For Min spacing configurations */
Always rely on 'driver_is_goingto_unload' of 'struct rtl_hal' and remove (presumably misused) 'driver_going2unload' from it. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> --- drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 6 +++--- drivers/net/wireless/realtek/rtlwifi/wifi.h | 2 -- 2 files changed, 3 insertions(+), 5 deletions(-)