@@ -385,13 +385,12 @@ &main_gpio0 {
&wkup_gpio0 {
pinctrl-names = "default";
- pinctrl-0 = <
- &arduino_io_d2_to_d3_pins_default
- &arduino_i2c_aio_switch_pins_default
- &arduino_io_oe_pins_default
- &push_button_pins_default
- &db9_com_mode_pins_default
- >;
+ pinctrl-0 =
+ <&arduino_io_d2_to_d3_pins_default>,
+ <&arduino_i2c_aio_switch_pins_default>,
+ <&arduino_io_oe_pins_default>,
+ <&push_button_pins_default>,
+ <&db9_com_mode_pins_default>;
gpio-line-names =
/* 0..9 */
"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
@@ -712,11 +711,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
&mcu_r5fss0_core0 {
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
};
&mcu_r5fss0_core1 {
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
};
@@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */
&main_gpio0 {
pinctrl-names = "default";
- pinctrl-0 = <
- &main_m2_pcie_mux_control
- &arduino_io_d4_to_d9_pins_default
- >;
+ pinctrl-0 =
+ <&main_m2_pcie_mux_control>,
+ <&arduino_io_d4_to_d9_pins_default>;
};
&main_gpio1 {
pinctrl-names = "default";
- pinctrl-0 = <
- &main_m2_enable_pins_default
- &main_pmx0_m2_config_pins_default
- &main_pmx1_m2_config_pins_default
- &cp2102n_reset_pin_default
- >;
+ pinctrl-0 =
+ <&main_m2_enable_pins_default>,
+ <&main_pmx0_m2_config_pins_default>,
+ <&main_pmx1_m2_config_pins_default>,
+ <&cp2102n_reset_pin_default>;
};
/*