@@ -431,12 +431,7 @@ static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
while
(serial_in(up, MTK_UART_DEBUG0));
- if (data->clk_count == 0U) {
- dev_dbg(dev, "%s clock count is 0\n", __func__);
- } else {
- clk_disable_unprepare(data->bus_clk);
- data->clk_count--;
- }
+ clk_disable_unprepare(data->bus_clk);
return 0;
}
@@ -444,19 +439,8 @@ static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
{
struct mtk8250_data *data = dev_get_drvdata(dev);
- int err;
- if (data->clk_count > 0U) {
- dev_dbg(dev, "%s clock count is %d\n", __func__,
- data->clk_count);
- } else {
- err = clk_prepare_enable(data->bus_clk);
- if (err) {
- dev_warn(dev, "Can't enable bus clock\n");
- return err;
- }
- data->clk_count++;
- }
+ clk_prepare_enable(data->bus_clk);
return 0;
}
@@ -465,14 +449,12 @@ static void
mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
if (!state)
- if (!mtk8250_runtime_resume(port->dev))
- pm_runtime_get_sync(port->dev);
+ pm_runtime_get_sync(port->dev);
serial8250_do_pm(port, state, old);
if (state)
- if (!pm_runtime_put_sync_suspend(port->dev))
- mtk8250_runtime_suspend(port->dev);
+ pm_runtime_put_sync_suspend(port->dev);
}
#ifdef CONFIG_SERIAL_8250_DMA
@@ -504,7 +486,7 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
return 0;
}
- data->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ data->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus");
if (IS_ERR(data->bus_clk))
return PTR_ERR(data->bus_clk);
@@ -587,25 +569,16 @@ static int mtk8250_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
- pm_runtime_enable(&pdev->dev);
- err = mtk8250_runtime_resume(&pdev->dev);
- if (err)
- goto err_pm_disable;
-
data->line = serial8250_register_8250_port(&uart);
- if (data->line < 0) {
- err = data->line;
- goto err_pm_disable;
- }
+ if (data->line < 0)
+ return data->line;
data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
- return 0;
-
-err_pm_disable:
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
- return err;
+ return 0;
}
static int mtk8250_remove(struct platform_device *pdev)
@@ -619,9 +592,6 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- mtk8250_runtime_suspend(&pdev->dev);
-
return 0;
}
The 8250_mtk driver's runtime PM support has some issues: - The bus clock is enabled (through runtime PM callback) later than a register write - runtime PM resume callback directly called in probe, but no pm_runtime_set_active() call is present - UART PM function calls the callbacks directly, _and_ calls runtime PM API - runtime PM callbacks try to do reference counting, adding yet another count between runtime PM and clocks This fragile setup worked in a way, but broke recently with runtime PM support added to the serial core. The system would hang when the UART console was probed and brought up. Tony provided some potential fixes [1][2], though they were still a bit complicated. The 8250_dw driver, which the 8250_mtk driver might have been based on, has a similar structure but simpler runtime PM usage. Simplify clock sequencing and runtime PM support in the 8250_mtk driver. Specifically, the clock is acquired enabled and assumed to be active, unless toggled through runtime PM suspend/resume. Reference counting is removed and left to the runtime PM core. The serial pm function now only calls the runtime PM API. [1] https://lore.kernel.org/linux-serial/20230602092701.GP14287@atomide.com/ [2] https://lore.kernel.org/linux-serial/20230605061511.GW14287@atomide.com/ Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- drivers/tty/serial/8250/8250_mtk.c | 50 ++++++------------------------ 1 file changed, 10 insertions(+), 40 deletions(-)