diff mbox

regulator: qcom_smd: add regulator ops for pm8941 lnldo

Message ID 1464952989-16062-1-git-send-email-srinivas.kandagatla@linaro.org
State Accepted
Commit d1e44b6b2823f1751ffe7e7589f545f05cfe2095
Headers show

Commit Message

Srinivas Kandagatla June 3, 2016, 11:23 a.m. UTC 
After "regulator: qcom_smd: add list_voltage callback" patch adding
pm8941 lnldo regulators would bug on list_voltages as it is a fixed
regulator without any linear range.
This patch fixes that issue by adding dedicated ops for pm8941 lnldo
without list_voltages callback.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/regulator/qcom_smd-regulator.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

-- 
2.8.2
diff mbox

Patch

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index b11b627..6c7fe477 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -148,6 +148,17 @@  static const struct regulator_ops rpm_smps_ldo_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
 static const struct regulator_ops rpm_switch_ops = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
@@ -248,7 +259,7 @@  static const struct regulator_desc pm8941_nldo = {
 static const struct regulator_desc pm8941_lnldo = {
 	.fixed_uV = 1740000,
 	.n_voltages = 1,
-	.ops = &rpm_smps_ldo_ops,
+	.ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {