diff mbox series

[v6,16/22] interconnect: qcom: qcm2290: Hook up RPM bus clk definitions

Message ID 20230526-topic-smd_icc-v6-16-263283111e66@linaro.org
State Superseded
Headers show
Series [v6,01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings | expand

Commit Message

Konrad Dybcio June 14, 2023, 6:04 p.m. UTC
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/qcm2290.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index 36a53add866d..8fc4acc4220b 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -1195,6 +1195,7 @@  static const struct qcom_icc_desc qcm2290_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = qcm2290_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &qcm2290_bimc_regmap_config,
 	/* M_REG_BASE() in vendor msm_bus_bimc_adhoc driver */
 	.qos_offset = 0x8000,
@@ -1250,6 +1251,7 @@  static const struct qcom_icc_desc qcm2290_cnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = qcm2290_cnoc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_cnoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &qcm2290_cnoc_regmap_config,
 };
 
@@ -1291,6 +1293,7 @@  static const struct qcom_icc_desc qcm2290_snoc = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_snoc_nodes),
+	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	/* Vendor DT node fab-sys_noc property 'qcom,base-offset' */
 	.qos_offset = 0x15000,
@@ -1305,6 +1308,7 @@  static const struct qcom_icc_desc qcm2290_qup_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_qup_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_qup_virt_nodes),
+	.bus_clk_desc = &qup_clk,
 };
 
 static struct qcom_icc_node * const qcm2290_mmnrt_virt_nodes[] = {
@@ -1318,6 +1322,7 @@  static const struct qcom_icc_desc qcm2290_mmnrt_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_mmnrt_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_mmnrt_virt_nodes),
+	.bus_clk_desc = &mmaxi_0_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
 };
@@ -1332,6 +1337,7 @@  static const struct qcom_icc_desc qcm2290_mmrt_virt = {
 	.type = QCOM_ICC_QNOC,
 	.nodes = qcm2290_mmrt_virt_nodes,
 	.num_nodes = ARRAY_SIZE(qcm2290_mmrt_virt_nodes),
+	.bus_clk_desc = &mmaxi_1_clk,
 	.regmap_cfg = &qcm2290_snoc_regmap_config,
 	.qos_offset = 0x15000,
 };