| Message ID | 20230617171541.286957-10-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 978869867216e669b6bed11aa669317a11e0dc7a |
| Headers | show |
| Series | [01/15] arm64: dts: qcom: msm8916-gt5: drop incorrect accelerometer interrupt-names | expand |
On 17.06.2023 19:15, Krzysztof Kozlowski wrote: > ADC channel node names were changed to require generic 'channel'. The > user-visible part is defined via label. > > sc8180x-lenovo-flex-5g.dtb: adc@3100: 'die-temp@6', 'ref-gnd@0', 'vref-1p25@1' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 24 ++++++++++----------- > 1 file changed, 12 insertions(+), 12 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi > index 8247af01c84a..4556af6cd103 100644 > --- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi > @@ -105,19 +105,19 @@ pmc8180_adc: adc@3100 { > #io-channel-cells = <1>; > interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > > - ref-gnd@0 { > + channel@0 { > reg = <ADC5_REF_GND>; > qcom,pre-scaling = <1 1>; > label = "ref_gnd"; > }; > > - vref-1p25@1 { > + channel@1 { > reg = <ADC5_1P25VREF>; > qcom,pre-scaling = <1 1>; > label = "vref_1p25"; > }; > > - die-temp@6 { > + channel@6 { > reg = <ADC5_DIE_TEMP>; > qcom,pre-scaling = <1 1>; > label = "die_temp"; > @@ -172,19 +172,19 @@ adc@3100 { > #io-channel-cells = <1>; > interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > > - ref-gnd@0 { > + channel@0 { > reg = <ADC5_REF_GND>; > qcom,pre-scaling = <1 1>; > label = "ref_gnd"; > }; > > - vref-1p25@1 { > + channel@1 { > reg = <ADC5_1P25VREF>; > qcom,pre-scaling = <1 1>; > label = "vref_1p25"; > }; > > - vcoin@85 { > + channel@85 { > reg = <0x85>; > qcom,pre-scaling = <1 1>; > label = "vcoin2"; > @@ -220,19 +220,19 @@ adc@3100 { > #io-channel-cells = <1>; > interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > > - ref-gnd@0 { > + channel@0 { > reg = <ADC5_REF_GND>; > qcom,pre-scaling = <1 1>; > label = "ref_gnd"; > }; > > - vref-1p25@1 { > + channel@1 { > reg = <ADC5_1P25VREF>; > qcom,pre-scaling = <1 1>; > label = "vref_1p25"; > }; > > - vcoin@85 { > + channel@85 { > reg = <0x85>; > qcom,pre-scaling = <1 1>; > label = "vcoin"; > @@ -270,19 +270,19 @@ pmc8180c_adc: adc@3100 { > #io-channel-cells = <1>; > interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > > - ref-gnd@0 { > + channel@0 { > reg = <ADC5_REF_GND>; > qcom,pre-scaling = <1 1>; > label = "ref_gnd"; > }; > > - vref-1p25@1 { > + channel@1 { > reg = <ADC5_1P25VREF>; > qcom,pre-scaling = <1 1>; > label = "vref_1p25"; > }; > > - die-temp@6 { > + channel@6 { > reg = <ADC5_DIE_TEMP>; > qcom,pre-scaling = <1 1>; > label = "die_temp";
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi index 8247af01c84a..4556af6cd103 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -105,19 +105,19 @@ pmc8180_adc: adc@3100 { #io-channel-cells = <1>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - die-temp@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; label = "die_temp"; @@ -172,19 +172,19 @@ adc@3100 { #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - vcoin@85 { + channel@85 { reg = <0x85>; qcom,pre-scaling = <1 1>; label = "vcoin2"; @@ -220,19 +220,19 @@ adc@3100 { #io-channel-cells = <1>; interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - vcoin@85 { + channel@85 { reg = <0x85>; qcom,pre-scaling = <1 1>; label = "vcoin"; @@ -270,19 +270,19 @@ pmc8180c_adc: adc@3100 { #io-channel-cells = <1>; interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - die-temp@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; label = "die_temp";
ADC channel node names were changed to require generic 'channel'. The user-visible part is defined via label. sc8180x-lenovo-flex-5g.dtb: adc@3100: 'die-temp@6', 'ref-gnd@0', 'vref-1p25@1' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 24 ++++++++++----------- 1 file changed, 12 insertions(+), 12 deletions(-)