| Message ID | 20230617133620.53129-6-stefan.wahren@i2se.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: bcm283x: Improve device-trees and bindings | expand |
From: Florian Fainelli <f.fainelli@gmail.com> On Sat, 17 Jun 2023 15:36:18 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote: > The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi > files accordingly and fix the dtbs_check warning: > > pwm@7e20c000: #pwm-cells:0:0: 3 was expected > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > --- Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! -- Florian
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index d30c19311145..4a379a14966d 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -278,7 +278,7 @@ pwm1: pwm@7e20c800 { clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clock-rates = <10000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index c9c52a19ef3b..2ca8a2505a4d 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -416,7 +416,7 @@ pwm: pwm@7e20c000 { clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; assigned-clock-rates = <10000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; };