Message ID | 20230617133620.53129-2-stefan.wahren@i2se.com |
---|---|
State | New |
Headers | show |
Series | ARM: dts: bcm283x: Improve device-trees and bindings | expand |
From: Florian Fainelli <f.fainelli@gmail.com> On Sat, 17 Jun 2023 15:36:14 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote: > Currently the dtbs_check for bcm2837 generates warnings like this: > > gpio@7e200000: 'pinctrl-0' is a dependency of 'pinctrl-names' > > This is caused by the definition of pinctrl-names without matching > pinctrl group and vice versa. So defining both at the same place > make the dts files easier to review. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! -- Florian
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 02ce817868ba..069b48272aa5 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -81,6 +81,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 3fdf60eb11dc..2726c00431e8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -83,6 +83,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 9956fd06a4b6..c57b999a4520 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -83,6 +83,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 4e1770afb145..ae6d3a9586ab 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -83,6 +83,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index eec1d0892d33..72764be75a79 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -83,6 +83,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index 87958a96c3e0..3f9d198ac3ab 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -73,6 +73,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index dbf825985ec0..1f0b163e400c 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -97,6 +97,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0>; }; @@ -111,6 +112,7 @@ &led_act { }; &sdhci { + pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index f80e65a825fd..539c19c10946 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -85,6 +85,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index ee9ee9d1fe65..f0acc9390f31 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -26,8 +26,6 @@ vchiq: mailbox@7e00b840 { }; &gpio { - pinctrl-names = "default"; - gpioout: gpioout { brcm,pins = <6>; brcm,function = <BCM2835_FSEL_GPIO_OUT>; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 6068ec390081..79918033750e 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -82,6 +82,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index cf84e69fced8..72d26d130efa 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -72,6 +72,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0>; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts index b9cc4594398b..85cf594724ef 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts @@ -95,6 +95,7 @@ &gpio { "SD_DATA2_R", "SD_DATA3_R"; + pinctrl-names = "default"; pinctrl-0 = <&gpioout &alt0>; }; @@ -109,6 +110,7 @@ &led_act { }; &sdhci { + pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; };
Currently the dtbs_check for bcm2837 generates warnings like this: gpio@7e200000: 'pinctrl-0' is a dependency of 'pinctrl-names' This is caused by the definition of pinctrl-names without matching pinctrl group and vice versa. So defining both at the same place make the dts files easier to review. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 ++ arch/arm/boot/dts/bcm2835-rpi-zero.dts | 1 + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 -- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 1 + arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts | 2 ++ 12 files changed, 13 insertions(+), 2 deletions(-)