diff mbox series

[v7,22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations

Message ID 20230526-topic-smd_icc-v7-22-09c78c175546@linaro.org
State Accepted
Commit 17fc623e0f728c35b82a0e79cd4f3b8aab495663
Headers show
Series Restructure RPM SMD ICC | expand

Commit Message

Konrad Dybcio June 19, 2023, 1:04 p.m. UTC
Up until now, we've been aggregating the bandwidth values and only
dividing them by the bus width of the source node. This was completely
wrong, as different nodes on a given path may (and usually do) have
varying bus widths.  That in turn, resulted in the calculated clock rates
being completely bogus - usually they ended up being much higher, as
NoC_A<->NoC_B links are very wide.

Since we're not using the aggregate bandwidth value for anything other
than clock rate calculations, remodel qcom_icc_bus_aggregate() to
calculate the per-context clock rate for a given provider, taking into
account the bus width of every individual node.

Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 59 ++++++++++++-------------------------
 1 file changed, 19 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 5733261d9407..3209d8de709b 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -292,58 +292,44 @@  static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 }
 
 /**
- * qcom_icc_bus_aggregate - aggregate bandwidth by traversing all nodes
+ * qcom_icc_bus_aggregate - calculate bus clock rates by traversing all nodes
  * @provider: generic interconnect provider
- * @agg_avg: an array for aggregated average bandwidth of buckets
- * @agg_peak: an array for aggregated peak bandwidth of buckets
- * @max_agg_avg: pointer to max value of aggregated average bandwidth
+ * @agg_clk_rate: array containing the aggregated clock rates in kHz
  */
-static void qcom_icc_bus_aggregate(struct icc_provider *provider,
-				   u64 *agg_avg, u64 *agg_peak,
-				   u64 *max_agg_avg)
+static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_rate)
 {
-	struct icc_node *node;
+	u64 agg_avg_rate, agg_rate;
 	struct qcom_icc_node *qn;
-	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
+	struct icc_node *node;
 	int i;
 
-	/* Initialise aggregate values */
-	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
-		agg_avg[i] = 0;
-		agg_peak[i] = 0;
-	}
-
-	*max_agg_avg = 0;
-
 	/*
-	 * Iterate nodes on the interconnect and aggregate bandwidth
-	 * requests for every bucket.
+	 * Iterate nodes on the provider, aggregate bandwidth requests for
+	 * every bucket and convert them into bus clock rates.
 	 */
 	list_for_each_entry(node, &provider->nodes, node_list) {
 		qn = node->data;
 		for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
 			if (qn->channels)
-				sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
+				agg_avg_rate = div_u64(qn->sum_avg[i], qn->channels);
 			else
-				sum_avg[i] = qn->sum_avg[i];
-			agg_avg[i] += sum_avg[i];
-			agg_peak[i] = max_t(u64, agg_peak[i], qn->max_peak[i]);
+				agg_avg_rate = qn->sum_avg[i];
+
+			agg_rate = max_t(u64, agg_avg_rate, qn->max_peak[i]);
+			do_div(agg_rate, qn->buswidth);
+
+			agg_clk_rate[i] = max_t(u64, agg_clk_rate[i], agg_rate);
 		}
 	}
-
-	/* Find maximum values across all buckets */
-	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++)
-		*max_agg_avg = max_t(u64, *max_agg_avg, agg_avg[i]);
 }
 
 static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 {
-	struct qcom_icc_provider *qp;
 	struct qcom_icc_node *src_qn = NULL, *dst_qn = NULL;
+	u64 agg_clk_rate[QCOM_SMD_RPM_STATE_NUM] = { 0 };
 	struct icc_provider *provider;
+	struct qcom_icc_provider *qp;
 	u64 active_rate, sleep_rate;
-	u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
-	u64 max_agg_avg;
 	int ret;
 
 	src_qn = src->data;
@@ -352,7 +338,9 @@  static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 	provider = src->provider;
 	qp = to_qcom_provider(provider);
 
-	qcom_icc_bus_aggregate(provider, agg_avg, agg_peak, &max_agg_avg);
+	qcom_icc_bus_aggregate(provider, agg_clk_rate);
+	active_rate = agg_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE];
+	sleep_rate = agg_clk_rate[QCOM_SMD_RPM_SLEEP_STATE];
 
 	ret = qcom_icc_rpm_set(src_qn, src_qn->sum_avg);
 	if (ret)
@@ -368,15 +356,6 @@  static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 	if (!qp->bus_clk_desc && !qp->bus_clk)
 		return 0;
 
-	/* Intentionally keep the rates in kHz as that's what RPM accepts */
-	active_rate = max(agg_avg[QCOM_SMD_RPM_ACTIVE_STATE],
-			  agg_peak[QCOM_SMD_RPM_ACTIVE_STATE]);
-	do_div(active_rate, src_qn->buswidth);
-
-	sleep_rate = max(agg_avg[QCOM_SMD_RPM_SLEEP_STATE],
-			 agg_peak[QCOM_SMD_RPM_SLEEP_STATE]);
-	do_div(sleep_rate, src_qn->buswidth);
-
 	/*
 	 * Downstream checks whether the requested rate is zero, but it makes little sense
 	 * to vote for a value that's below the lower threshold, so let's not do so.