@@ -143,11 +143,28 @@ config SOC_SAM9X60
help
Select this if you are using Microchip's SAM9X60 SoC
+config SOC_SAM9X7
+ bool "SAM9X7"
+ depends on ARCH_MULTI_V5
+ select ATMEL_AIC5_IRQ
+ select ATMEL_PM if PM
+ select ATMEL_SDRAMC
+ select CPU_ARM926T
+ select HAVE_AT91_USB_CLK
+ select HAVE_AT91_GENERATED_CLK
+ select HAVE_AT91_SAM9X60_PLL
+ select MEMORY
+ select PINCTRL_AT91
+ select SOC_SAM_V4_V5
+ select SRAM if PM
+ help
+ Select this if you are using Microchip's SAM9X7 SoC
+
comment "Clocksource driver selection"
config ATMEL_CLOCKSOURCE_PIT
bool "Periodic Interval Timer (PIT) support"
- depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
default SOC_AT91SAM9 || SOC_SAMA5
select ATMEL_PIT
help
@@ -157,7 +174,7 @@ config ATMEL_CLOCKSOURCE_PIT
config ATMEL_CLOCKSOURCE_TCB
bool "Timer Counter Blocks (TCB) support"
- default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
select ATMEL_TCB_CLKSRC
help
Select this to get a high precision clocksource based on a
@@ -168,7 +185,7 @@ config ATMEL_CLOCKSOURCE_TCB
config MICROCHIP_CLOCKSOURCE_PIT64B
bool "64-bit Periodic Interval Timer (PIT64B) support"
- default SOC_SAM9X60 || SOC_SAMA7
+ default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
select MICROCHIP_PIT64B
help
Select this to get a high resolution clockevent (SAM9X60) or
Add config flag for sam9x7 SoC. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> --- arch/arm/mach-at91/Kconfig | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)