diff mbox series

thermal/drivers/qcom/temp-alarm: Use dev_err_probe

Message ID 20230625-spmi-temp-alarm-defer-v1-1-2d57acf36855@z3ntu.xyz
State Accepted
Commit 57c9eaa4de537e6f08819d9214de502cac5a989c
Headers show
Series thermal/drivers/qcom/temp-alarm: Use dev_err_probe | expand

Commit Message

Luca Weiss June 25, 2023, 11:11 a.m. UTC
Use the dev_err_probe function instead of dev_err in the probe function
so that the printed message includes the return value and also handles
-EPROBE_DEFER nicely.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 34 ++++++++++++-----------------
 1 file changed, 14 insertions(+), 20 deletions(-)


---
base-commit: 8d2be868b42c08290509c60515865f4de24ea704
change-id: 20230625-spmi-temp-alarm-defer-0889b80544e3

Best regards,

Comments

Konrad Dybcio June 26, 2023, 9:47 a.m. UTC | #1
On 25.06.2023 13:11, Luca Weiss wrote:
> Use the dev_err_probe function instead of dev_err in the probe function
> so that the printed message includes the return value and also handles
> -EPROBE_DEFER nicely.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 34 ++++++++++++-----------------
>  1 file changed, 14 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> index 2a3b3e21260f..0e8ebfcd84c5 100644
> --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> @@ -411,22 +411,19 @@ static int qpnp_tm_probe(struct platform_device *pdev)
>  	chip->base = res;
>  
>  	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "could not read type\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "could not read type\n");
>  
>  	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "could not read subtype\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "could not read subtype\n");
>  
>  	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "could not read dig_major\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "could not read dig_major\n");
>  
>  	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
>  				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
> @@ -448,16 +445,13 @@ static int qpnp_tm_probe(struct platform_device *pdev)
>  	 */
>  	chip->tz_dev = devm_thermal_of_zone_register(
>  		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
> -	if (IS_ERR(chip->tz_dev)) {
> -		dev_err(&pdev->dev, "failed to register sensor\n");
> -		return PTR_ERR(chip->tz_dev);
> -	}
> +	if (IS_ERR(chip->tz_dev))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
> +				     "failed to register sensor\n");
>  
>  	ret = qpnp_tm_init(chip);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "init failed\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret, "init failed\n");
>  
>  	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
>  
> 
> ---
> base-commit: 8d2be868b42c08290509c60515865f4de24ea704
> change-id: 20230625-spmi-temp-alarm-defer-0889b80544e3
> 
> Best regards,
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 2a3b3e21260f..0e8ebfcd84c5 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -411,22 +411,19 @@  static int qpnp_tm_probe(struct platform_device *pdev)
 	chip->base = res;
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read type\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read type\n");
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read subtype\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read subtype\n");
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not read dig_major\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not read dig_major\n");
 
 	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
 				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
@@ -448,16 +445,13 @@  static int qpnp_tm_probe(struct platform_device *pdev)
 	 */
 	chip->tz_dev = devm_thermal_of_zone_register(
 		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
-	if (IS_ERR(chip->tz_dev)) {
-		dev_err(&pdev->dev, "failed to register sensor\n");
-		return PTR_ERR(chip->tz_dev);
-	}
+	if (IS_ERR(chip->tz_dev))
+		return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
+				     "failed to register sensor\n");
 
 	ret = qpnp_tm_init(chip);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "init failed\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "init failed\n");
 
 	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);