new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+ pm8821: pmic {
+ compatible = "qcom,pm8821";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8821_mpps 0 0 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
@@ -8,6 +8,30 @@ pm8921: pmic {
#address-cells = <1>;
#size-cells = <0>;
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8921_mpps: mpps@50 {
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8921_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
@@ -36,5 +60,80 @@ rtc@11d {
reg = <0x11d>;
allow-set-time;
};
+
+ pm8921_xoadc: xoadc@197 {
+ compatible = "qcom,pm8921-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ batt_therm: adc-channel@8 {
+ reg = <0x00 0x08>;
+ };
+
+ batt_id: adc-channel@9 {
+ reg = <0x00 0x09>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ chg_temp: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
};
};
@@ -1,8 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Asus Nexus7(flo)";
compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -1,8 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -1,10 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -324,23 +324,6 @@ scm {
};
};
-
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
- <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
- <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
- <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -683,132 +666,25 @@ rng@1a500000 {
clock-names = "core";
};
- ssbi@c00000 {
+ ssbi2: ssbi@c00000 {
compatible = "qcom,ssbi";
reg = <0x00c00000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8821: pmic {
- compatible = "qcom,pm8821";
+ pmic {
interrupt-parent = <&tlmm_pinmux>;
interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8821_mpps: mpps@50 {
- compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
- reg = <0x50>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8821_mpps 0 0 4>;
- };
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8921: pmic {
- compatible = "qcom,pm8921";
+ pmic {
interrupt-parent = <&tlmm_pinmux>;
interrupts = <74 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8921_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 1>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8921>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8921_xoadc: xoadc@197 {
- compatible = "qcom,pm8921-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- batt_therm: adc-channel@8 {
- reg = <0x00 0x08>;
- };
- batt_id: adc-channel@9 {
- reg = <0x00 0x09>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- chg_temp: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
};
};
The PMICs are not a part of the SoC, so move PMICs to separate files and include them from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom/pm8821.dtsi | 22 +++ arch/arm/boot/dts/qcom/pm8921.dtsi | 99 +++++++++++++ .../dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 6 +- .../boot/dts/qcom/qcom-apq8064-cm-qs600.dts | 5 +- .../boot/dts/qcom/qcom-apq8064-ifc6410.dts | 5 +- .../qcom-apq8064-sony-xperia-lagan-yuga.dts | 5 +- arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 132 +----------------- 7 files changed, 142 insertions(+), 132 deletions(-) create mode 100644 arch/arm/boot/dts/qcom/pm8821.dtsi