| Message ID | 20230702174246.121656-21-dmitry.baryshkov@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,01/28] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs | expand |
On 2.07.2023 19:42, Dmitry Baryshkov wrote: > Add device node for the clock controller for the CPU cores and L2 > clocks. It will be further used by the L2 and by the CPUfreq nodes. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 26 ++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi > index ab4b8f8270bb..c212215800d0 100644 > --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi > +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi > @@ -213,6 +213,32 @@ sleep_clk: sleep_clk { > }; > }; > > + kraitcc: clock-controller { > + compatible = "qcom,krait-cc-v1"; > + clocks = <&gcc PLL9>, /* hfpll0 */ > + <&gcc PLL10>, /* hfpll1 */ > + <&gcc PLL16>, /* hfpll2 */ > + <&gcc PLL17>, /* hfpll3 */ > + <&gcc PLL12>, /* hfpll_l2 */ I'm not sure how useful these comments are, given clock-names are just like 7 lines below. Konrad > + <&acc0>, > + <&acc1>, > + <&acc2>, > + <&acc3>, > + <&l2cc>; > + clock-names = "hfpll0", > + "hfpll1", > + "hfpll2", > + "hfpll3", > + "hfpll_l2", > + "acpu0_aux", > + "acpu1_aux", > + "acpu2_aux", > + "acpu3_aux", > + "acpu_l2_aux"; > + #clock-cells = <1>; > + #interconnect-cells = <1>; > + }; > + > sfpb_mutex: hwmutex { > compatible = "qcom,sfpb-mutex"; > syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index ab4b8f8270bb..c212215800d0 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -213,6 +213,32 @@ sleep_clk: sleep_clk { }; }; + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + clocks = <&gcc PLL9>, /* hfpll0 */ + <&gcc PLL10>, /* hfpll1 */ + <&gcc PLL16>, /* hfpll2 */ + <&gcc PLL17>, /* hfpll3 */ + <&gcc PLL12>, /* hfpll_l2 */ + <&acc0>, + <&acc1>, + <&acc2>, + <&acc3>, + <&l2cc>; + clock-names = "hfpll0", + "hfpll1", + "hfpll2", + "hfpll3", + "hfpll_l2", + "acpu0_aux", + "acpu1_aux", + "acpu2_aux", + "acpu3_aux", + "acpu_l2_aux"; + #clock-cells = <1>; + #interconnect-cells = <1>; + }; + sfpb_mutex: hwmutex { compatible = "qcom,sfpb-mutex"; syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
Add device node for the clock controller for the CPU cores and L2 clocks. It will be further used by the L2 and by the CPUfreq nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+)