diff mbox series

[RESEND,v1,2/2] riscv: dts: starfive: Add spi node for JH7110 SoC

Message ID 20230704092200.85401-3-william.qiu@starfivetech.com
State Superseded
Headers show
Series Add SPI module for StarFive JH7110 SoC | expand

Commit Message

William Qiu July 4, 2023, 9:22 a.m. UTC
Add spi node for JH7110 SoC.

Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 52 ++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 98 +++++++++++++++++++
 2 files changed, 150 insertions(+)

--
2.34.1

Comments

Mark Brown July 4, 2023, 12:26 p.m. UTC | #1
On Tue, Jul 04, 2023 at 11:39:29AM +0200, Krzysztof Kozlowski wrote:
> On 04/07/2023 11:22, William Qiu wrote:
> > Add spi node for JH7110 SoC.
> > 
> > Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> 
> Missing SoB.

It's fine not to have a signoff for the codeveloper of codeveloped
patches, see case (a) for the DCO.
Mark Brown July 4, 2023, 1:16 p.m. UTC | #2
On Tue, Jul 04, 2023 at 02:27:57PM +0200, Krzysztof Kozlowski wrote:

> Also see:
> "every Co-developed-by: must be immediately
> followed by a Signed-off-by: of the associated co-author."

> https://elixir.bootlin.com/linux/v6.4/source/Documentation/process/submitting-patches.rst#L467

Oh, that seems unhelpful especially with it not lining up with the DCO.
Mark Brown July 4, 2023, 2:13 p.m. UTC | #3
On Tue, Jul 04, 2023 at 03:21:30PM +0200, Krzysztof Kozlowski wrote:
> On 04/07/2023 15:16, Mark Brown wrote:
> > On Tue, Jul 04, 2023 at 02:27:57PM +0200, Krzysztof Kozlowski wrote:

> >> Also see:
> >> "every Co-developed-by: must be immediately
> >> followed by a Signed-off-by: of the associated co-author."

> >> https://elixir.bootlin.com/linux/v6.4/source/Documentation/process/submitting-patches.rst#L467

> > Oh, that seems unhelpful especially with it not lining up with the DCO.

> I assume the intention was here that if I attribute some co-author with
> Co-developed-by, then I know that author, therefore I expect author to
> explicitly participate in DCO chain.

Why?  They're not the one sending the patch out, nor are they relying on
someone else having certified anything.

> Otherwise, just drop the Co-developed-by.

It seems separately useful.
Conor Dooley July 4, 2023, 4:41 p.m. UTC | #4
On Tue, Jul 04, 2023 at 03:13:17PM +0100, Mark Brown wrote:
> On Tue, Jul 04, 2023 at 03:21:30PM +0200, Krzysztof Kozlowski wrote:
> > On 04/07/2023 15:16, Mark Brown wrote:
> > > On Tue, Jul 04, 2023 at 02:27:57PM +0200, Krzysztof Kozlowski wrote:
> 
> > >> Also see:
> > >> "every Co-developed-by: must be immediately
> > >> followed by a Signed-off-by: of the associated co-author."
> 
> > >> https://elixir.bootlin.com/linux/v6.4/source/Documentation/process/submitting-patches.rst#L467
> 
> > > Oh, that seems unhelpful especially with it not lining up with the DCO.
> 
> > I assume the intention was here that if I attribute some co-author with
> > Co-developed-by, then I know that author, therefore I expect author to
> > explicitly participate in DCO chain.
> 
> Why?  They're not the one sending the patch out, nor are they relying on
> someone else having certified anything.

It's probably safe to say that StarFive owns the contributions anyway,
so I doubt adding really makes a difference here.

> > Otherwise, just drop the Co-developed-by.
> 
> It seems separately useful.

Yup, I'd rather have the people there if I ever have to run `git blame`
on whatever commit this becomes.
William Qiu July 5, 2023, 3:40 a.m. UTC | #5
On 2023/7/4 17:39, Krzysztof Kozlowski wrote:
> On 04/07/2023 11:22, William Qiu wrote:
>> Add spi node for JH7110 SoC.
>> 
>> Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> 
> Missing SoB.
> 
It looks like that drop it is the best solution.
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> ---
>>  .../jh7110-starfive-visionfive-2.dtsi         | 52 ++++++++++
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 98 +++++++++++++++++++
>>  2 files changed, 150 insertions(+)
>> 
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index 2a6d81609284..a066d2e399c4 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -126,6 +126,20 @@ &i2c6 {
>>  	status = "okay";
>>  };
>> 
>> +&spi0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&spi0_pins>;
>> +	status = "okay";
>> +
>> +	spi_dev0: spi@0 {
>> +		compatible = "st,m25p80";
>> +		pl022,com-mode = <1>;
>> +		spi-max-frequency = <10000000>;
>> +		reg = <0>;
> 
> reg is always following compatible, not somewhere deep in properties.
> 
Will update.
>> +		status = "okay";
> 
> okay is by default
> 
Will drop.
>> +	};
>> +};
> 
> 
> Best regards,
> Krzysztof
> 
Thanks for taking time to review this patch series.
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 2a6d81609284..a066d2e399c4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -126,6 +126,20 @@  &i2c6 {
 	status = "okay";
 };

+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi_dev0: spi@0 {
+		compatible = "st,m25p80";
+		pl022,com-mode = <1>;
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		status = "okay";
+	};
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
@@ -183,6 +197,44 @@  GPOEN_SYS_I2C6_DATA,
 		};
 	};

+	spi0_pins: spi0-0 {
+		mosi-pins {
+			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		miso-pins {
+			pinmux = <GPIOMUX(53, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_SPI0_RXD)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		sck-pins {
+			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_CLK)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		ss-pins {
+			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_FSS,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_FSS)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
 	uart0_pins: uart0-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..b32611c7cdf7 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -353,6 +353,48 @@  i2c2: i2c@10050000 {
 			status = "disabled";
 		};

+		spi0: spi@10060000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10060000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI0_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI0_APB>;
+			interrupts = <38>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10070000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10070000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI1_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI1_APB>;
+			interrupts = <39>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@10080000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10080000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI2_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI2_APB>;
+			interrupts = <40>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -440,6 +482,62 @@  i2c6: i2c@12060000 {
 			status = "disabled";
 		};

+		spi3: spi@12070000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12070000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI3_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI3_APB>;
+			interrupts = <52>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@12080000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12080000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI4_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI4_APB>;
+			interrupts = <53>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@12090000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12090000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI5_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI5_APB>;
+			interrupts = <54>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@120a0000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x120A0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI6_APB>;
+			clock-names = "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI6_APB>;
+			interrupts = <55>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		syscrg: clock-controller@13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;