diff mbox series

[v2,2/4] dt-bindings: input: iqs7222: Define units for slider properties

Message ID ZKrpMekZBt95Gmnr@nixie71
State Accepted
Commit 92b46a7bd1c4966e8178da008930cdc0af43dad8
Headers show
Series Add support for Azoteq IQS7222D | expand

Commit Message

Jeff LaBundy July 9, 2023, 5:06 p.m. UTC 
The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed'
and 'azoteq,gesture-dist' properties are unspecified; define them
according to the device's datasheet.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
 .../bindings/input/azoteq,iqs7222.yaml           | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Krzysztof Kozlowski July 10, 2023, 8:16 a.m. UTC | #1 
On 09/07/2023 19:06, Jeff LaBundy wrote:
> The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed'
> and 'azoteq,gesture-dist' properties are unspecified; define them
> according to the device's datasheet.
> 
> Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 9ddba7f2e7aa..4c8690b62ce0 100644
--- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -521,16 +521,16 @@  patternProperties:
         minimum: 0
         maximum: 65535
         description:
-          Specifies the speed of movement after which coordinate filtering is
-          no longer applied.
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is no longer applied.
 
       azoteq,bottom-speed:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 255
         description:
-          Specifies the speed of movement after which coordinate filtering is
-          linearly reduced.
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is linearly reduced.
 
       azoteq,bottom-beta:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -595,10 +595,10 @@  patternProperties:
             minimum: 0
             maximum: 4080
             description:
-              Specifies the distance across which a swipe or flick gesture must
-              travel in order to be acknowledged by the device. The number spec-
-              ified for any one swipe or flick gesture applies to all remaining
-              swipe or flick gestures.
+              Specifies the distance (in coordinates) across which a swipe or
+              flick gesture must travel in order to be acknowledged by the
+              device. The number specified for any one swipe or flick gesture
+              applies to all remaining swipe or flick gestures.
 
           azoteq,gpio-select:
             $ref: /schemas/types.yaml#/definitions/uint32-array