new file mode 100644
@@ -0,0 +1,447 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0
+
+.. c:namespace:: dtv.legacy.audio
+
+.. _dvb_audio:
+
+================
+DVB Audio Device
+================
+
+.. attention:: Do **not** use in new drivers!
+ See: :ref:`legacy_dvb_decoder_notes`
+
+The DVB audio device controls the MPEG2 audio decoder of the DVB
+hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
+types and ioctl definitions can be accessed by including
+``linux/dvb/audio.h`` in your application.
+
+Please note that most DVB cards don’t have their own MPEG decoder, which
+results in the omission of the audio and video device.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality. Use :ref:`V4L2 ioctls<video>` for new drivers!
+
+
+Audio Data Types
+================
+
+This section describes the structures, data types and defines used when
+talking to the audio device.
+
+
+-----
+
+
+audio_stream_source_t
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_stream_source_t
+
+.. code-block:: c
+
+ typedef enum {
+ AUDIO_SOURCE_DEMUX,
+ AUDIO_SOURCE_MEMORY
+ } audio_stream_source_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - ``AUDIO_SOURCE_DEMUX``
+
+ - :cspan:`1` Selects the demultiplexer (fed either by the frontend
+ or the DVR device) as the source of the video stream.
+
+ - ..
+
+ - ``AUDIO_SOURCE_MEMORY``
+
+ - Selects the stream from the application that comes through
+ the `write()`_ system call.
+
+Description
+~~~~~~~~~~~
+
+The audio stream source is set through the `AUDIO_SELECT_SOURCE`_ call
+and can take the following values, depending on whether we are replaying
+from an internal (demux) or external (user write) source.
+
+The data fed to the decoder is also controlled by the PID-filter.
+Output selection: :c:enum:`dmx_output` ``DMX_OUT_DECODER``.
+
+
+-----
+
+
+audio_play_state_t
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_play_state_t
+
+.. code-block:: c
+
+ typedef enum {
+ AUDIO_STOPPED,
+ AUDIO_PLAYING,
+ AUDIO_PAUSED
+ } audio_play_state_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - ``AUDIO_STOPPED``
+
+ - Audio is stopped.
+
+ - ..
+
+ - ``AUDIO_PLAYING``
+
+ - Audio is currently playing.
+
+ - ..
+
+ - ``AUDIO_PAUSE``
+
+ - Audio is frozen.
+
+Description
+~~~~~~~~~~~
+
+This values can be returned by the `AUDIO_GET_STATUS`_ call
+representing the state of audio playback.
+
+
+-----
+
+
+audio_channel_select_t
+----------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_channel_select_t
+
+.. code-block:: c
+
+ typedef enum {
+ AUDIO_STEREO,
+ AUDIO_MONO_LEFT,
+ AUDIO_MONO_RIGHT,
+ AUDIO_MONO,
+ AUDIO_STEREO_SWAPPED
+ } audio_channel_select_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - ``AUDIO_STEREO``
+
+ - Stereo.
+
+ - ..
+
+ - ``AUDIO_MONO_LEFT``
+
+ - Mono, select left stereo channel as source.
+
+ - ..
+
+ - ``AUDIO_MONO_RIGHT``
+
+ - Mono, select right stereo channel as source.
+
+ - ..
+
+ - ``AUDIO_MONO``
+
+ - Mono source only.
+
+ - ..
+
+ - ``AUDIO_STEREO_SWAPPED``
+
+ - Stereo, swap L & R.
+
+Description
+~~~~~~~~~~~
+
+The audio channel selected via `AUDIO_CHANNEL_SELECT`_ is determined by
+this values.
+
+
+-----
+
+
+audio_mixer_t
+-------------
+
+Synopsis
+~~~~~~~~
+
+.. c:struct:: audio_mixer
+
+.. code-block:: c
+
+ typedef struct audio_mixer {
+ unsigned int volume_left;
+ unsigned int volume_right;
+ } audio_mixer_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - ``unsigned int volume_left``
+
+ - Volume left channel.
+ Valid range: 0 ... 255
+
+ - ..
+
+ - ``unsigned int volume_right``
+
+ - Volume right channel.
+ Valid range: 0 ... 255
+
+Description
+~~~~~~~~~~~
+
+This structure is used by the `AUDIO_SET_MIXER`_ call to set the
+audio volume.
+
+
+-----
+
+
+audio_status
+------------
+
+Synopsis
+~~~~~~~~
+
+.. c:struct:: audio_status
+
+.. code-block:: c
+
+ typedef struct audio_status {
+ int AV_sync_state;
+ int mute_state;
+ audio_play_state_t play_state;
+ audio_stream_source_t stream_source;
+ audio_channel_select_t channel_select;
+ int bypass_mode;
+ audio_mixer_t mixer_state;
+ } audio_status_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - :rspan:`2` ``int AV_sync_state``
+
+ - :cspan:`1` Shows if A/V synchronization is ON or OFF.
+
+ - ..
+
+ - TRUE ( != 0 )
+
+ - AV-sync ON.
+
+ - ..
+
+ - FALSE ( == 0 )
+
+ - AV-sync OFF.
+
+ - ..
+
+ - :rspan:`2` ``int mute_state``
+
+ - :cspan:`1` Indicates if audio is muted or not.
+
+ - ..
+
+ - TRUE ( != 0 )
+
+ - mute audio
+
+ - ..
+
+ - FALSE ( == 0 )
+
+ - unmute audio
+
+ - ..
+
+ - `audio_play_state_t`_ ``play_state``
+
+ - Current playback state.
+
+ - ..
+
+ - `audio_stream_source_t`_ ``stream_source``
+
+ - Current source of the data.
+
+ - ..
+
+ - :rspan:`2` ``int bypass_mode``
+
+ - :cspan:`1` Is the decoding of the current Audio stream in
+ the DVB subsystem enabled or disabled.
+
+ - ..
+
+ - TRUE ( != 0 )
+
+ - Bypass disabled.
+
+ - ..
+
+ - FALSE ( == 0 )
+
+ - Bypass enabled.
+
+ - ..
+
+ - `audio_mixer_t`_ ``mixer_state``
+
+ - Current volume settings.
+
+Description
+~~~~~~~~~~~
+
+The `AUDIO_GET_STATUS`_ call returns this structure as information
+about various states of the playback operation.
+
+
+-----
+
+
+audio encodings
+---------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+ #define AUDIO_CAP_DTS 1
+ #define AUDIO_CAP_LPCM 2
+ #define AUDIO_CAP_MP1 4
+ #define AUDIO_CAP_MP2 8
+ #define AUDIO_CAP_MP3 16
+ #define AUDIO_CAP_AAC 32
+ #define AUDIO_CAP_OGG 64
+ #define AUDIO_CAP_SDDS 128
+ #define AUDIO_CAP_AC3 256
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - ..
+
+ - ``AUDIO_CAP_DTS``
+
+ - :cspan:`1` The hardware accepts DTS audio tracks.
+
+ - ..
+
+ - ``AUDIO_CAP_LPCM``
+
+ - The hardware accepts uncompressed audio with
+ Linear Pulse-Code Modulation (LPCM)
+
+ - ..
+
+ - ``AUDIO_CAP_MP1``
+
+ - The hardware accepts MPEG-1 Audio Layer 1.
+
+ - ..
+
+ - ``AUDIO_CAP_MP2``
+
+ - The hardware accepts MPEG-1 Audio Layer 2.
+ Also known as MUSICAM.
+
+ - ..
+
+ - ``AUDIO_CAP_MP3``
+
+ - The hardware accepts MPEG-1 Audio Layer III.
+ Commomly known as .mp3.
+
+ - ..
+
+ - ``AUDIO_CAP_AAC``
+
+ - The hardware accepts AAC (Advanced Audio Coding).
+
+ - ..
+
+ - ``AUDIO_CAP_OGG``
+
+ - The hardware accepts Vorbis audio tracks.
+
+ - ..
+
+ - ``AUDIO_CAP_SDDS``
+
+ - The hardware accepts Sony Dynamic Digital Sound (SDDS).
+
+ - ..
+
+ - ``AUDIO_CAP_AC3``
+
+ - The hardware accepts Dolby Digital ATSC A/52 audio.
+ Also known as AC-3.
+
+Description
+~~~~~~~~~~~
+
+A call to `AUDIO_GET_CAPABILITIES`_ returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
Add new documentation file for audio.h Step 1: data types only Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de> --- .../media/dvb/legacy_dvb_audio.rst | 447 ++++++++++++++++++ 1 file changed, 447 insertions(+) create mode 100644 Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst -- 2.34.0