diff mbox series

[v5,5/6] arm64: dts: qcom: ipq5332: Enable USB

Message ID 2f8f86fdef6cad65954b7668cb13fc132b685a4b.1689913334.git.quic_varada@quicinc.com
State New
Headers show
Series [v5,1/6] dt-bindings: usb: dwc3: Add IPQ5332 compatible | expand

Commit Message

Varadarajan Narayanan July 21, 2023, 4:35 a.m. UTC
Enable USB2 in host mode.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v1:
	Enable usb-phy node
---
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Bjorn Andersson July 22, 2023, 5:07 a.m. UTC | #1
On Fri, Jul 21, 2023 at 10:05:30AM +0530, Varadarajan Narayanan wrote:
> Enable USB2 in host mode.
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v1:
> 	Enable usb-phy node
> ---
>  arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> index f96b0c8..f5dea16 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> @@ -79,3 +79,15 @@
>  		bias-pull-up;
>  	};
>  };
> +
> +&usbphy0 {
> +	status = "okay";

Is this phy not powered? Should there be some regulators controlled?

Regards,
Bjorn
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
index f96b0c8..f5dea16 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -79,3 +79,15 @@ 
 		bias-pull-up;
 	};
 };
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_0_dwc {
+	dr_mode = "host";
+};