diff mbox series

[5/7] clk: qcom: hfpll: Add MSM8976 PLL data

Message ID 20230723140712.9438-6-a39.skl@gmail.com
State Accepted
Commit 1fa2d1a887c763246662a88e203d69b36052770c
Headers show
Series MSM8976 PLL,RPMPD and DTS changes. | expand

Commit Message

Adam Skladowski July 23, 2023, 2:06 p.m. UTC 
Add PLL configuration for MSM8976 SoC, this SoC offers 3 HFPLL.
Small cluster offers two presets for 652-902Mhz range and 902Mhz-1.47Ghz.
For simplicity only add second range as smaller frequencies can be obtained
via apcs divider or safe parent this also saves us
a hassle of reconfiguring VCO bit and config_val.
A72 and CCI cluster only use single frequency range with their
outputs/post_dividers/vco_bits being static.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 drivers/clk/qcom/hfpll.c | 54 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
index ec18bc8f0089..a9c4c77e0f50 100644
--- a/drivers/clk/qcom/hfpll.c
+++ b/drivers/clk/qcom/hfpll.c
@@ -32,8 +32,62 @@  static const struct hfpll_data hdata = {
 	.max_rate = 2900000000UL,
 };
 
+static const struct hfpll_data msm8976_a53 = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x341600,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x35,
+	.user_val = 0x109,
+	.min_rate = 902400000UL,
+	.max_rate = 1478400000UL,
+};
+
+static const struct hfpll_data msm8976_a72 = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x4e0405d,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x3e,
+	.user_val = 0x100109,
+	.min_rate = 940800000UL,
+	.max_rate = 1843200000UL,
+};
+
+static const struct hfpll_data msm8976_cci = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x141400,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x20,
+	.user_val = 0x100109,
+	.min_rate = 556800000UL,
+	.max_rate = 902400000UL,
+};
+
 static const struct of_device_id qcom_hfpll_match_table[] = {
 	{ .compatible = "qcom,hfpll", &hdata },
+	{ .compatible = "qcom,hfpll-msm8976-a53", &msm8976_a53 },
+	{ .compatible = "qcom,hfpll-msm8976-a72", &msm8976_a72 },
+	{ .compatible = "qcom,hfpll-msm8976-cci", &msm8976_cci },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);