@@ -205,6 +205,46 @@ static int qca_send_reset(struct hci_dev *hdev)
return 0;
}
+static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
+{
+ u8 cmd;
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ int err = 0;
+ u8 bid_len;
+
+ cmd = EDL_GET_BID_REQ_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+ &cmd, 0, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Reading QCA board ID failed (%d)", err);
+ return err;
+ }
+
+ edl = skb_pull_data(skb, sizeof(*edl));
+ if (!edl) {
+ bt_dev_err(hdev, "QCA read board ID with no header");
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_GET_BID_REQ_CMD) {
+ bt_dev_err(hdev, "QCA Wrong packet: %d %d", edl->cresp, edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+ bid_len = edl->data[0];
+ *bid = (edl->data[1] << 8) + edl->data[2];
+ bt_dev_dbg(hdev, "%s: bid len = %x, bid = %x", __func__, bid_len, *bid);
+
+out:
+ kfree_skb(skb);
+ return err;
+}
+
int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -574,6 +614,29 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
+static void qca_generate_nvm_name(struct hci_dev *hdev, char *fwname,
+ size_t max_size, struct qca_btsoc_version ver, u16 bid)
+{
+ u8 rom_ver;
+ u32 soc_ver;
+ const char *variant;
+
+ soc_ver = get_soc_ver(ver.soc_id, ver.rom_ver);
+ rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
+
+ if ((le32_to_cpu(ver.soc_id) & 0x0000ff00) == QCA_HSP_GF_SOC_ID) /* hsp gf chip */
+ variant = "g";
+ else
+ variant = "";
+
+ if (bid == 0x0)
+ snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
+ else
+ snprintf(fwname, max_size, "qca/hpnv%02x%s.%x", rom_ver, variant, bid);
+
+ bt_dev_dbg(hdev, "%s: nvm name is %s", __func__, fwname);
+}
+
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
const char *firmware_name)
@@ -582,6 +645,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
int err;
u8 rom_ver = 0;
u32 soc_ver;
+ u16 boardid = 0;
bt_dev_dbg(hdev, "QCA setup on UART");
@@ -604,6 +668,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
if (qca_is_wcn399x(soc_type)) {
snprintf(config.fwname, sizeof(config.fwname),
"qca/crbtfw%02x.tlv", rom_ver);
+ } else if (soc_type == QCA_QCA2066) {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hpbtfw%02x.tlv", rom_ver);
} else if (soc_type == QCA_QCA6390) {
snprintf(config.fwname, sizeof(config.fwname),
"qca/htbtfw%02x.tlv", rom_ver);
@@ -631,6 +698,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
/* Give the controller some time to get ready to receive the NVM */
msleep(10);
+ if (soc_type == QCA_QCA2066)
+ qca_read_fw_board_id(hdev, &boardid);
+
/* Download NVM configuration */
config.type = TLV_TYPE_NVM;
if (firmware_name)
@@ -644,8 +714,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
snprintf(config.fwname, sizeof(config.fwname),
"qca/crnv%02x.bin", rom_ver);
}
- }
- else if (soc_type == QCA_QCA6390)
+ } else if (soc_type == QCA_QCA2066) {
+ qca_generate_nvm_name(hdev, config.fwname, sizeof(config.fwname),
+ ver, boardid);
+ } else if (soc_type == QCA_QCA6390)
snprintf(config.fwname, sizeof(config.fwname),
"qca/htnv%02x.bin", rom_ver);
else if (soc_type == QCA_WCN6750)
@@ -12,6 +12,7 @@
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
#define EDL_GET_BUILD_INFO_CMD (0x20)
+#define EDL_GET_BID_REQ_CMD (0x23)
#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
#define EDL_PATCH_CONFIG_CMD (0x28)
#define MAX_SIZE_PER_TLV_SEGMENT (243)
@@ -47,7 +48,7 @@
((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver)))
#define QCA_FW_BUILD_VER_LEN 255
-
+#define QCA_HSP_GF_SOC_ID 0x1200
enum qca_baudrate {
QCA_BAUDRATE_115200 = 0,
@@ -1748,6 +1748,7 @@ static int qca_setup(struct hci_uart *hu)
const char *firmware_name = qca_get_firmware_name(hu);
int ret;
struct qca_btsoc_version ver;
+ const char *soc_name;
ret = qca_check_speeds(hu);
if (ret)
@@ -1938,6 +1939,11 @@ static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
.num_vregs = 0,
};
+static const struct qca_device_data qca_soc_data_qca2066 __maybe_unused = {
+ .soc_type = QCA_QCA2066,
+ .num_vregs = 0,
+};
+
static const struct qca_device_data qca_soc_data_wcn6750 __maybe_unused = {
.soc_type = QCA_WCN6750,
.vregs = (struct qca_vreg []) {
@@ -2428,6 +2434,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
+ { .compatible = "qcom,qca2066-bt", .data = &qca_soc_data_qca2066},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
@@ -2435,6 +2442,7 @@ MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
+ { "QCOM2066", (kernel_ulong_t)&qca_soc_data_qca2066 },
{ "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
{ "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
{ "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
This patch adds support for QCA2066 firmware patch and NVM downloading. as the RF performance of QCA2066 SOC chip from different foundries may vary. Therefore we use different NVM to configure them based on board ID. Signed-off-by: Tim Jiang <quic_tjiang@quicinc.com> --- drivers/bluetooth/btqca.c | 76 ++++++++++++++++++++++++++++++++++++- drivers/bluetooth/btqca.h | 3 +- drivers/bluetooth/hci_qca.c | 8 ++++ 3 files changed, 84 insertions(+), 3 deletions(-)