diff mbox series

[V1,2/2] scsi: ufs: ufs-qcom: check host controller state

Message ID 20230725192710.26698-3-quic_nitirawa@quicinc.com
State Superseded
Headers show
Series None | expand

Commit Message

Nitin Rawat July 25, 2023, 7:27 p.m. UTC
Check host controller state before sending hibern8 command.

Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)

--
2.17.1

Comments

Bjorn Andersson July 26, 2023, 5:34 a.m. UTC | #1
On Wed, Jul 26, 2023 at 12:57:10AM +0530, Nitin Rawat wrote:
> Check host controller state before sending hibern8 command.
> 

Please read https://docs.kernel.org/process/submitting-patches.html#describe-your-changes

> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>

Please read https://docs.kernel.org/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin

> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
>  drivers/ufs/host/ufs-qcom.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 8d6fd4c3324f..95412e98a598 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -1254,6 +1254,10 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
>  	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
>  	int err = 0;
> 
> +	/* check the host controller state before sending hibern8 cmd */

That is exactly what the two lines does, but the comment does not
provide any insight into why this is done. Keeping a comment here seems
relevant, please make sure that it adds value.

Thanks,
Bjorn

> +	if (!ufshcd_is_hba_active(hba))
> +		return 0;
> +
>  	if (status == PRE_CHANGE) {
>  		err = ufshcd_uic_hibern8_enter(hba);
>  		if (err)
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 8d6fd4c3324f..95412e98a598 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1254,6 +1254,10 @@  static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
 	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
 	int err = 0;

+	/* check the host controller state before sending hibern8 cmd */
+	if (!ufshcd_is_hba_active(hba))
+		return 0;
+
 	if (status == PRE_CHANGE) {
 		err = ufshcd_uic_hibern8_enter(hba);
 		if (err)