diff mbox series

[1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size

Message ID 20230724082632.21133-1-ansuelsmth@gmail.com
State New
Headers show
Series [1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size | expand

Commit Message

Christian Marangi July 24, 2023, 8:26 a.m. UTC
Add support for u-boot,env-size new property.

Permit to declare a custom size of the U-Boot env that differs than the
partition size where the U-Boot env is located.

U-Boot env is validated by calculating the CRC32 on the entire env
and in some specific case, the env size might differ from the partition
size resulting in wrong CRC32 calculation than the expected one saved at
the start of the partition.

This happens when U-Boot is compiled by hardcoding a specific env size
but the env is actually placed in a bigger partition, resulting in needing
to provide a custom value.

Declaring this property, this value will be used for NVMEM size instead of
the mtd partition.

Add also an example to make it clear the scenario of mismatched
partition size and actual U-Boot env.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/nvmem/u-boot,env.yaml | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
index 36d97fb87865..3970725a2c57 100644
--- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -44,6 +44,24 @@  properties:
   reg:
     maxItems: 1
 
+  u-boot,env-size:
+    description: |
+      Permit to declare a custom size of the U-Boot env that differs than the
+      partition size where the U-Boot env is located.
+
+      U-Boot env is validated by calculating the CRC32 on the entire env
+      and in some specific case, the env size might differ from the partition
+      size resulting in wrong CRC32 calculation than the expected one saved at
+      the start of the partition.
+
+      This happens when U-Boot is compiled by hardcoding a specific env size
+      but the env is actually placed in a bigger partition, resulting in needing
+      to provide a custom value.
+
+      Declaring this property, this value will be used for NVMEM size instead of
+      the mtd partition.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
   bootcmd:
     type: object
     description: Command to use for automatic booting
@@ -99,3 +117,32 @@  examples:
             };
         };
     };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0xc80000>;
+            label = "qcadata";
+            read-only;
+        };
+
+        partition@c80000 {
+            label = "APPSBL";
+            reg = <0xc80000 0x500000>;
+            read-only;
+        };
+
+        partition@1180000 {
+            compatible = "u-boot,env";
+            reg = <0x1180000 0x80000>;
+
+            u-boot,env-size = <0x40000>;
+
+            mac1: ethaddr {
+                #nvmem-cell-cells = <1>;
+            };
+        };
+    };