diff mbox series

[v3,2/8] thermal: core: Do not handle trip points with invalid temperature

Message ID 4822145.GXAFRqVoOG@kreacher
State Superseded
Headers show
Series ACPI: thermal: Use trip point table to register thermal zones | expand

Commit Message

Rafael J. Wysocki July 25, 2023, 12:06 p.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Trip points with temperature set to THERMAL_TEMP_INVALID are as good as
disabled, so make handle_thermal_trip() ignore them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v2 -> v3: No changes.

v1 -> v2: No changes.

---
 drivers/thermal/thermal_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Daniel Lezcano Aug. 1, 2023, 6:29 p.m. UTC | #1
On 25/07/2023 14:06, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Trip points with temperature set to THERMAL_TEMP_INVALID are as good as
> disabled, so make handle_thermal_trip() ignore them.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> v2 -> v3: No changes.
> 
> v1 -> v2: No changes.
> 
> ---
>   drivers/thermal/thermal_core.c |    3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> Index: linux-pm/drivers/thermal/thermal_core.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_core.c
> +++ linux-pm/drivers/thermal/thermal_core.c
> @@ -348,7 +348,8 @@ static void handle_thermal_trip(struct t
>   	struct thermal_trip trip;
>   
>   	/* Ignore disabled trip points */
> -	if (test_bit(trip_id, &tz->trips_disabled))
> +	if (test_bit(trip_id, &tz->trips_disabled) ||
> +	    trip.temperature == THERMAL_TEMP_INVALID)
>   		return;

This will set the temperature to THERMAL_TEMP_INVALID at each thermal 
zone update.

It would make more sense to set it when setting the disabled bit at init 
time, no?

But is that something we really want to do ? The trip point will be 
reordered due to the temperature change (-273°C)
Rafael J. Wysocki Aug. 1, 2023, 7:05 p.m. UTC | #2
On Tue, Aug 1, 2023 at 8:29 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
> On 25/07/2023 14:06, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Trip points with temperature set to THERMAL_TEMP_INVALID are as good as
> > disabled, so make handle_thermal_trip() ignore them.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >
> > v2 -> v3: No changes.
> >
> > v1 -> v2: No changes.
> >
> > ---
> >   drivers/thermal/thermal_core.c |    3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > Index: linux-pm/drivers/thermal/thermal_core.c
> > ===================================================================
> > --- linux-pm.orig/drivers/thermal/thermal_core.c
> > +++ linux-pm/drivers/thermal/thermal_core.c
> > @@ -348,7 +348,8 @@ static void handle_thermal_trip(struct t
> >       struct thermal_trip trip;
> >
> >       /* Ignore disabled trip points */
> > -     if (test_bit(trip_id, &tz->trips_disabled))
> > +     if (test_bit(trip_id, &tz->trips_disabled) ||
> > +         trip.temperature == THERMAL_TEMP_INVALID)
> >               return;
>
> This will set the temperature to THERMAL_TEMP_INVALID at each thermal
> zone update.

What do you mean?

It doesn't set anything.

> It would make more sense to set it when setting the disabled bit at init
> time, no?
>
> But is that something we really want to do ? The trip point will be
> reordered due to the temperature change (-273°C)

Again, I'm not sure what you mean.
Daniel Lezcano Aug. 1, 2023, 7:31 p.m. UTC | #3
On 01/08/2023 21:05, Rafael J. Wysocki wrote:
> On Tue, Aug 1, 2023 at 8:29 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>>
>> On 25/07/2023 14:06, Rafael J. Wysocki wrote:
>>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>>
>>> Trip points with temperature set to THERMAL_TEMP_INVALID are as good as
>>> disabled, so make handle_thermal_trip() ignore them.
>>>
>>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>> ---
>>>
>>> v2 -> v3: No changes.
>>>
>>> v1 -> v2: No changes.
>>>
>>> ---
>>>    drivers/thermal/thermal_core.c |    3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> Index: linux-pm/drivers/thermal/thermal_core.c
>>> ===================================================================
>>> --- linux-pm.orig/drivers/thermal/thermal_core.c
>>> +++ linux-pm/drivers/thermal/thermal_core.c
>>> @@ -348,7 +348,8 @@ static void handle_thermal_trip(struct t
>>>        struct thermal_trip trip;
>>>
>>>        /* Ignore disabled trip points */
>>> -     if (test_bit(trip_id, &tz->trips_disabled))
>>> +     if (test_bit(trip_id, &tz->trips_disabled) ||
>>> +         trip.temperature == THERMAL_TEMP_INVALID)
>>>                return;
>>
>> This will set the temperature to THERMAL_TEMP_INVALID at each thermal
>> zone update.
> 
> What do you mean?
> 
> It doesn't set anything.

Oh never mind, I read '=' not '=='

>> It would make more sense to set it when setting the disabled bit at init
>> time, no?
>>
>> But is that something we really want to do ? The trip point will be
>> reordered due to the temperature change (-273°C)
> 
> Again, I'm not sure what you mean.
diff mbox series

Patch

Index: linux-pm/drivers/thermal/thermal_core.c
===================================================================
--- linux-pm.orig/drivers/thermal/thermal_core.c
+++ linux-pm/drivers/thermal/thermal_core.c
@@ -348,7 +348,8 @@  static void handle_thermal_trip(struct t
 	struct thermal_trip trip;
 
 	/* Ignore disabled trip points */
-	if (test_bit(trip_id, &tz->trips_disabled))
+	if (test_bit(trip_id, &tz->trips_disabled) ||
+	    trip.temperature == THERMAL_TEMP_INVALID)
 		return;
 
 	__thermal_zone_get_trip(tz, trip_id, &trip);