| Message ID | 20230728083435.118491-1-alexander.stein@ew.tq-group.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/1] arm64: dts: imx93: Fix anatop node size | expand |
> Subject: [PATCH 1/1] arm64: dts: imx93: Fix anatop node size > > Although the memory map of i.MX93 reference manual rev. 2 claims that > analog top has start address of 0x44480000 and end address of 0x4448ffff, > this overlaps with TMU memory area starting at 0x44482000, as stated in > section 73.6.1. > As PLL configuration registers start at addresses up to 0x44481400, as used by > clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area but > keep all PLL registers inside. > > Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Yes, the anatop size should be changed. Found the same issue after rebase our downstream kernel to 6.5.0-rc1. Reviewed-by: Jacky Bai <ping.bai@nxp.com> BR > --- > Unfortunately TMU isn't listed in memory map, so it was a bit of guess work. > > This fixes the probe failure of qoriq_thermal: > qoriq_thermal 44482000.tmu: can't request region for resource [mem > 0x44482000-0x44482fff] qoriq_thermal 44482000.tmu: Failed to get memory > region > qoriq_thermal: probe of 44482000.tmu failed with error -16 > > /proc/iomem also shows it's claimed by anatop: > > 44480000-4448ffff : 44450000.clock-controller anatop@44480000 > > arch/arm64/boot/dts/freescale/imx93.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi > b/arch/arm64/boot/dts/freescale/imx93.dtsi > index 4ec9df78f2050..6f85a05ee7e1a 100644 > --- a/arch/arm64/boot/dts/freescale/imx93.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi > @@ -379,7 +379,7 @@ mediamix: power-domain@44462400 { > > anatop: anatop@44480000 { > compatible = "fsl,imx93-anatop", "syscon"; > - reg = <0x44480000 0x10000>; > + reg = <0x44480000 0x2000>; > }; > > tmu: tmu@44482000 { > -- > 2.34.1
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 4ec9df78f2050..6f85a05ee7e1a 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -379,7 +379,7 @@ mediamix: power-domain@44462400 { anatop: anatop@44480000 { compatible = "fsl,imx93-anatop", "syscon"; - reg = <0x44480000 0x10000>; + reg = <0x44480000 0x2000>; }; tmu: tmu@44482000 {
Although the memory map of i.MX93 reference manual rev. 2 claims that analog top has start address of 0x44480000 and end address of 0x4448ffff, this overlaps with TMU memory area starting at 0x44482000, as stated in section 73.6.1. As PLL configuration registers start at addresses up to 0x44481400, as used by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area but keep all PLL registers inside. Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Unfortunately TMU isn't listed in memory map, so it was a bit of guess work. This fixes the probe failure of qoriq_thermal: qoriq_thermal 44482000.tmu: can't request region for resource [mem 0x44482000-0x44482fff] qoriq_thermal 44482000.tmu: Failed to get memory region qoriq_thermal: probe of 44482000.tmu failed with error -16 /proc/iomem also shows it's claimed by anatop: > 44480000-4448ffff : 44450000.clock-controller anatop@44480000 arch/arm64/boot/dts/freescale/imx93.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)