| Message ID | 20230731111158.3998107-1-dmitry.baryshkov@linaro.org |
|---|---|
| State | Accepted |
| Commit | 916b5916f228a9f83a22ad91ad8c5bf788a456d7 |
| Headers | show |
| Series | arm64: dts: qcom: sc8180x: switch UFS QMP PHY to new style of bindings | expand |
On 31.07.2023 13:11, Dmitry Baryshkov wrote: > Change the UFS QMP PHY to use newer style of QMP PHY bindings (single > resource region, no per-PHY subnodes). > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > > As with the rest of UFS DTS conversion patches, this patch should wait > for 6.6, so that the patch flow is bisectable. > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Mon, 31 Jul 2023 14:11:58 +0300, Dmitry Baryshkov wrote: > Change the UFS QMP PHY to use newer style of QMP PHY bindings (single > resource region, no per-PHY subnodes). > > Applied, thanks! [1/1] arm64: dts: qcom: sc8180x: switch UFS QMP PHY to new style of bindings commit: 916b5916f228a9f83a22ad91ad8c5bf788a456d7 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index fae149e33b98..3c79b82eac6e 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2080,7 +2080,7 @@ ufs_mem_hc: ufshc@1d84000 { "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2119,10 +2119,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy-wrapper@1d87000 { compatible = "qcom,sc8180x-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", @@ -2130,16 +2128,10 @@ ufs_mem_phy: phy-wrapper@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; ipa_virt: interconnect@1e00000 {
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- As with the rest of UFS DTS conversion patches, this patch should wait for 6.6, so that the patch flow is bisectable. --- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-)