diff mbox

[16/92] clocksource/drivers/asm9260: Convert init function to return error

Message ID 1467109911-11060-16-git-send-email-daniel.lezcano@linaro.org
State Superseded
Headers show

Commit Message

Daniel Lezcano June 28, 2016, 10:30 a.m. UTC 
The init functions do not return any error. They behave as the following:

 - panic, thus leading to a kernel crash while another timer may work and
   make the system boot up correctly

 or

 - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

---
 drivers/clocksource/asm9260_timer.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

-- 
1.9.1
diff mbox

Patch

diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 217438d..d113c02 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -184,7 +184,7 @@  static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init asm9260_timer_init(struct device_node *np)
+static int __init asm9260_timer_init(struct device_node *np)
 {
 	int irq;
 	struct clk *clk;
@@ -192,20 +192,26 @@  static void __init asm9260_timer_init(struct device_node *np)
 	unsigned long rate;
 
 	priv.base = of_io_request_and_map(np, 0, np->name);
-	if (IS_ERR(priv.base))
-		panic("%s: unable to map resource", np->name);
+	if (IS_ERR(priv.base)) {
+		pr_err("%s: unable to map resource", np->name);
+		return PTR_ERR(priv.base);
+	}
 
 	clk = of_clk_get(np, 0);
 
 	ret = clk_prepare_enable(clk);
-	if (ret)
-		panic("Failed to enable clk!\n");
+	if (ret) {
+		pr_err("Failed to enable clk!\n");
+		return ret;
+	}
 
 	irq = irq_of_parse_and_map(np, 0);
 	ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
 			DRIVER_NAME, &event_dev);
-	if (ret)
-		panic("Failed to setup irq!\n");
+	if (ret) {
+		pr_err("Failed to setup irq!\n");
+		return ret;
+	}
 
 	/* set all timers for count-up */
 	writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
@@ -229,6 +235,8 @@  static void __init asm9260_timer_init(struct device_node *np)
 	priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
 	event_dev.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
+
+	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+CLOCKSOURCE_OF_DECLARE_RET(asm9260_timer, "alphascale,asm9260-timer",
 		asm9260_timer_init);