diff mbox series

[v1,05/12] serial: cpm_uart: Deduplicate cpm_set_{brg/smc_fcr/scc_fcr}()

Message ID 6920e61fd362961ae1aeda897c8bfe1efacdc9dc.1691068700.git.christophe.leroy@csgroup.eu
State New
Headers show
Series serial: cpm_uart: Cleanup and refactoring | expand

Commit Message

Christophe Leroy Aug. 3, 2023, 1:56 p.m. UTC 
CPMFCR_EB is the same as SMC_EB and is defined
for both CPM1 and CPM2.

CPMFCR_GBL is defined as 0 for CPM1.

Therefore the CPM2 version of cpm_set_scc_fcr() and
cpm_set_smc_fcr() can be used on both CPM1 and CPM2.

And cpm_set_brg() is already identical and just a
wrapper of cpm_setbrg().

In addition those three fonctions are only called once
from cpm_uart_core.c, so just replace the calls with
the content of the CPM2 versions of them.

And DPRAM_BASE is identical so can go in cpm_uart.h. While
moving it, use cpm_muram_addr() directly instead of the
cpm_dpram_addr() macro and remove __force tag which isn't needed.

Then cpm_uart_cpm1.h and cpm_uart_cpm2.h go away.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 drivers/tty/serial/cpm_uart/cpm_uart.h      |  6 ++--
 drivers/tty/serial/cpm_uart/cpm_uart_core.c |  8 +++--
 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 33 ---------------------
 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 33 ---------------------
 4 files changed, 9 insertions(+), 71 deletions(-)
 delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h
 delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h
diff mbox series

Patch

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h
index c220700df693..81c1c5f97d19 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart.h
+++ b/drivers/tty/serial/cpm_uart/cpm_uart.h
@@ -15,11 +15,13 @@ 
 struct gpio_desc;
 
 #if defined(CONFIG_CPM2)
-#include "cpm_uart_cpm2.h"
+#include "asm/cpm2.h"
 #elif defined(CONFIG_CPM1)
-#include "cpm_uart_cpm1.h"
+#include "asm/cpm1.h"
 #endif
 
+#define DPRAM_BASE	((u8 __iomem *)cpm_muram_addr(0))
+
 #define SERIAL_CPM_MAJOR	204
 #define SERIAL_CPM_MINOR	46
 
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 36bac4390c13..743892c0e143 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -603,7 +603,7 @@  static void cpm_uart_set_termios(struct uart_port *port,
 	if (pinfo->clk)
 		clk_set_rate(pinfo->clk, baud);
 	else
-		cpm_set_brg(pinfo->brg - 1, baud);
+		cpm_setbrg(pinfo->brg - 1, baud);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -769,7 +769,8 @@  static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 	 * parameter ram.
 	 */
 
-	cpm_set_scc_fcr(sup);
+	out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+	out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB);
 
 	out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
 	out_be16(&sup->scc_maxidl, 0x10);
@@ -840,7 +841,8 @@  static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	/* Set up the uart parameters in the
 	 * parameter ram.
 	 */
-	cpm_set_smc_fcr(up);
+	out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+	out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB);
 
 	/* Using idle character time requires some additional tuning.  */
 	out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h
deleted file mode 100644
index 18ec0849918a..000000000000
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h
+++ /dev/null
@@ -1,33 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Driver for CPM (SCC/SMC) serial ports
- *
- * definitions for cpm1
- *
- */
-
-#ifndef CPM_UART_CPM1_H
-#define CPM_UART_CPM1_H
-
-#include <asm/cpm1.h>
-
-static inline void cpm_set_brg(int brg, int baud)
-{
-	cpm_setbrg(brg, baud);
-}
-
-static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)
-{
-	out_8(&sup->scc_genscc.scc_rfcr, SMC_EB);
-	out_8(&sup->scc_genscc.scc_tfcr, SMC_EB);
-}
-
-static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)
-{
-	out_8(&up->smc_rfcr, SMC_EB);
-	out_8(&up->smc_tfcr, SMC_EB);
-}
-
-#define DPRAM_BASE	((u8 __iomem __force *)cpm_dpram_addr(0))
-
-#endif
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h
deleted file mode 100644
index 051a8509c3e5..000000000000
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h
+++ /dev/null
@@ -1,33 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Driver for CPM (SCC/SMC) serial ports
- *
- * definitions for cpm2
- *
- */
-
-#ifndef CPM_UART_CPM2_H
-#define CPM_UART_CPM2_H
-
-#include <asm/cpm2.h>
-
-static inline void cpm_set_brg(int brg, int baud)
-{
-	cpm_setbrg(brg, baud);
-}
-
-static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup)
-{
-	out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB);
-	out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB);
-}
-
-static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up)
-{
-	out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB);
-	out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB);
-}
-
-#define DPRAM_BASE	((u8 __iomem __force *)cpm_dpram_addr(0))
-
-#endif