diff mbox series

[2/2] drm/panel: nv3051d: Add Support for Anbernic 351V

Message ID 20230804164503.135169-3-macroalpha82@gmail.com
State New
Headers show
Series Support Anbernic RG351V Panel | expand

Commit Message

Chris Morgan Aug. 4, 2023, 4:45 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Anbernic 351V. Just like the 353 series the
underlying vendor is unknown/unmarked (at least not visible in a
non-destructive manner). The panel had slightly different init
sequences and timings in the BSP kernel, but works fine with the
same ones used in the existing driver. The panel will not work without
the inclusion of the MIPI_DSI_CLOCK_NON_CONTINUOUS flag, and this flag
prevents the 353 series from working correctly, so a new compatible
string is added.

Tested colors and timings using modetest and all seem to work identical
to the 353 otherwise.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../gpu/drm/panel/panel-newvision-nv3051d.c    | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3051d.c b/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
index a07958038ffd..dc0d6dcca683 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
@@ -28,6 +28,7 @@  struct nv3051d_panel_info {
 	unsigned int num_modes;
 	u16 width_mm, height_mm;
 	u32 bus_flags;
+	unsigned long mode_flags;
 };
 
 struct panel_nv3051d {
@@ -385,8 +386,7 @@  static int panel_nv3051d_probe(struct mipi_dsi_device *dsi)
 
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
-			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
+	dsi->mode_flags = ctx->panel_info->mode_flags;
 
 	drm_panel_init(&ctx->panel, &dsi->dev, &panel_nv3051d_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
@@ -480,10 +480,24 @@  static const struct nv3051d_panel_info nv3051d_rgxx3_info = {
 	.width_mm = 70,
 	.height_mm = 57,
 	.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
+};
+
+static const struct nv3051d_panel_info nv3051d_rg351v_info = {
+	.display_modes = nv3051d_rgxx3_modes,
+	.num_modes = ARRAY_SIZE(nv3051d_rgxx3_modes),
+	.width_mm = 70,
+	.height_mm = 57,
+	.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET |
+		      MIPI_DSI_CLOCK_NON_CONTINUOUS,
 };
 
 static const struct of_device_id newvision_nv3051d_of_match[] = {
 	{ .compatible = "newvision,nv3051d", .data = &nv3051d_rgxx3_info },
+	{ .compatible = "anbernic,rg351v-panel", .data = &nv3051d_rg351v_info },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, newvision_nv3051d_of_match);