diff mbox series

[1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation

Message ID 20230804-topic-sm8550-upstream-type-c-orientation-v1-1-36dd3edec7bf@linaro.org
State New
Headers show
Series arm64: qcom: sm8550: retrieve USB-C port orientation from gpio | expand

Commit Message

Neil Armstrong Aug. 4, 2023, 1:50 p.m. UTC
On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
GPIO line set by the PMIC.

Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index bceb479f74c5..1b0a00b19a54 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -35,6 +35,11 @@  properties:
   '#size-cells':
     const: 0
 
+  orientation-gpios:
+    description: An input gpio for Type-C connector orientation, used to detect orientation
+      of the Type-C connector. GPIO active level means "CC2" or Reversed/Flipped orientation.
+    maxItems: 1
+
 patternProperties:
   '^connector@\d$':
     $ref: /schemas/connector/usb-connector.yaml#
@@ -44,6 +49,19 @@  patternProperties:
 required:
   - compatible
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sm8450-pmic-glink
+                - qcom,sm8550-pmic-glink
+    then:
+      properties:
+        orientation-gpios: false
+
 additionalProperties: false
 
 examples: