@@ -22,6 +22,7 @@
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
+ u-boot,dm-pre-reloc;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
@@ -65,9 +66,12 @@
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
+ status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59800000 {
@@ -109,9 +113,15 @@
interrupt-controller;
};
- pinctrl: pinctrl@5f801000 {
- /* specify compatible in each SoC DTSI */
- reg = <0x5f801000 0xe00>;
+ soc-glue@5f800000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+ u-boot,dm-pre-reloc;
+
+ pinctrl: pinctrl {
+ /* specify compatible in each SoC DTSI */
+ u-boot,dm-pre-reloc;
+ };
};
sysctrl: sysctrl@61840000 {
@@ -124,8 +134,12 @@
nand: nand@68000000 {
compatible = "denali,denali-nand-dt";
- reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ status = "disabled";
reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
};
};
};
@@ -1,7 +1,8 @@
/*
* Device Tree Source for UniPhier PH1-LD11 Reference Board
*
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+ X11
*/
@@ -62,20 +63,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -1,11 +1,14 @@
/*
* Device Tree Source for UniPhier PH1-LD11 SoC
*
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+ X11
*/
+/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */
+
/ {
compatible = "socionext,ph1-ld11";
#address-cells = <2>;
@@ -16,24 +19,41 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@0 {
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x000>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x001>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
};
clocks {
+ refclk: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -60,6 +80,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ u-boot,dm-pre-reloc;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
@@ -183,6 +204,8 @@
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59800000 {
@@ -226,9 +249,15 @@
#clock-cells = <1>;
};
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-ld11-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
+ soc-glue@5f800000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+ u-boot,dm-pre-reloc;
+
+ pinctrl: pinctrl {
+ compatible = "socionext,uniphier-ld11-pinctrl";
+ u-boot,dm-pre-reloc;
+ };
};
gic: interrupt-controller@5fe00000 {
@@ -51,20 +51,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -6,6 +6,8 @@
* SPDX-License-Identifier: GPL-2.0+ X11
*/
+/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */
+
/ {
compatible = "socionext,ph1-ld20";
#address-cells = <2>;
@@ -41,7 +43,7 @@
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
cpu1: cpu@1 {
@@ -49,7 +51,7 @@
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
cpu2: cpu@100 {
@@ -57,7 +59,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
cpu3: cpu@101 {
@@ -65,11 +67,17 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x80000000>;
};
};
clocks {
+ refclk: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
uart_clk: uart_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -96,6 +104,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ u-boot,dm-pre-reloc;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
@@ -219,6 +228,8 @@
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59800000 {
@@ -243,9 +254,14 @@
bus-width = <4>;
};
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-ld20-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
+ soc-glue@5f800000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+
+ pinctrl: pinctrl {
+ compatible = "socionext,uniphier-ld20-pinctrl";
+ u-boot,dm-pre-reloc;
+ };
};
gic: interrupt-controller@5fe00000 {
@@ -69,20 +69,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -310,7 +310,7 @@
};
&pinctrl {
- compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+ compatible = "socionext,uniphier-ld4-pinctrl";
};
&sysctrl {
@@ -71,20 +71,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -17,7 +17,7 @@
compatible = "socionext,ph1-ld6b";
};
-/* UART3 unavilable: the pads are not wired to the package balls */
+/* UART3 unavailable: the pads are not wired to the package balls */
&serial3 {
status = "disabled";
};
@@ -27,5 +27,5 @@
* which makes the pinctrl driver unshareable.
*/
&pinctrl {
- compatible = "socionext,ph1-ld6b-pinctrl", "syscon";
+ compatible = "socionext,uniphier-ld6b-pinctrl";
};
@@ -90,20 +90,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -80,20 +80,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -85,12 +85,6 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
@@ -103,10 +97,6 @@
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -452,7 +452,7 @@
};
&pinctrl {
- compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pro4-pinctrl";
};
&sysctrl {
@@ -56,20 +56,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial1 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart1 {
u-boot,dm-pre-reloc;
};
@@ -431,7 +431,7 @@
};
&pinctrl {
- compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pro5-pinctrl";
};
&sysctrl {
@@ -73,20 +73,10 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial0 {
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart0 {
u-boot,dm-pre-reloc;
};
@@ -310,7 +310,7 @@
};
&pinctrl {
- compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+ compatible = "socionext,uniphier-sld8-pinctrl";
};
&sysctrl {
@@ -47,6 +47,11 @@
function = "nand";
};
+ pinctrl_nand2cs: nand2cs_grp {
+ groups = "nand", "nand_cs1";
+ function = "nand";
+ };
+
pinctrl_sd: sd_grp {
groups = "sd";
function = "sd";
@@ -67,6 +72,11 @@
function = "sd1";
};
+ pinctrl_system_bus: system_bus_grp {
+ groups = "system_bus", "system_bus_cs1";
+ function = "system_bus";
+ };
+
pinctrl_uart0: uart0_grp {
groups = "uart0";
function = "uart0";
@@ -65,12 +65,6 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial2 {
u-boot,dm-pre-reloc;
};
@@ -83,10 +77,6 @@
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart2 {
u-boot,dm-pre-reloc;
};
@@ -50,12 +50,6 @@
};
/* for U-Boot only */
-/ {
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
&serial2 {
u-boot,dm-pre-reloc;
};
@@ -68,10 +62,6 @@
u-boot,dm-pre-reloc;
};
-&pinctrl {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl_uart2 {
u-boot,dm-pre-reloc;
};
@@ -435,7 +435,7 @@
};
&pinctrl {
- compatible = "socionext,proxstream2-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pxs2-pinctrl";
};
&sysctrl {
@@ -7,7 +7,7 @@
*/
&i2c0 {
- eeprom {
+ eeprom@50 {
compatible = "microchip,24lc128", "i2c-eeprom";
reg = <0x50>;
u-boot,i2c-offset-len = <2>;
I periodically sync Device Trees for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/dts/uniphier-common32.dtsi | 22 +++++++++++--- arch/arm/dts/uniphier-ph1-ld11-ref.dts | 13 ++------ arch/arm/dts/uniphier-ph1-ld11.dtsi | 45 +++++++++++++++++++++++----- arch/arm/dts/uniphier-ph1-ld20-ref.dts | 10 ------- arch/arm/dts/uniphier-ph1-ld20.dtsi | 30 ++++++++++++++----- arch/arm/dts/uniphier-ph1-ld4-ref.dts | 10 ------- arch/arm/dts/uniphier-ph1-ld4.dtsi | 2 +- arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 10 ------- arch/arm/dts/uniphier-ph1-ld6b.dtsi | 4 +-- arch/arm/dts/uniphier-ph1-pro4-ace.dts | 10 ------- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 10 ------- arch/arm/dts/uniphier-ph1-pro4-sanji.dts | 10 ------- arch/arm/dts/uniphier-ph1-pro4.dtsi | 2 +- arch/arm/dts/uniphier-ph1-pro5-4kbox.dts | 10 ------- arch/arm/dts/uniphier-ph1-pro5.dtsi | 2 +- arch/arm/dts/uniphier-ph1-sld8-ref.dts | 10 ------- arch/arm/dts/uniphier-ph1-sld8.dtsi | 2 +- arch/arm/dts/uniphier-pinctrl.dtsi | 10 +++++++ arch/arm/dts/uniphier-proxstream2-gentil.dts | 10 ------- arch/arm/dts/uniphier-proxstream2-vodka.dts | 10 ------- arch/arm/dts/uniphier-proxstream2.dtsi | 2 +- arch/arm/dts/uniphier-ref-daughter.dtsi | 2 +- 22 files changed, 98 insertions(+), 138 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot