@@ -552,6 +552,7 @@ [Components]
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+ OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
PciHostBridgeLib|OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf
@@ -561,6 +561,7 @@ [Components.X64]
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+ OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
PciHostBridgeLib|OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf
@@ -559,6 +559,7 @@ [Components]
UefiCpuPkg/CpuDxe/CpuDxe.inf
PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+ OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
PciHostBridgeLib|OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf
@@ -208,6 +208,7 @@ [FV.DXEFV]
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+INF OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
@@ -208,6 +208,7 @@ [FV.DXEFV]
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+INF OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
@@ -208,6 +208,7 @@ [FV.DXEFV]
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
+INF OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
new file mode 100644
@@ -0,0 +1,46 @@
+## @file
+# This driver implements EFI_PCI_HOT_PLUG_INIT_PROTOCOL, providing the PCI bus
+# driver with resource padding information, for PCIe hotplug purposes.
+#
+# Copyright (C) 2016, Red Hat, Inc.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PciHotPlugInitDxe
+ FILE_GUID = 11A6EDF6-A9BE-426D-A6CC-B22FE51D9224
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = DriverInitialize
+
+[Sources]
+ PciHotPlugInit.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ PcdLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gEfiPciHotPlugInitProtocolGuid ## SOMETIMES_PRODUCES
+
+[FeaturePcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport ## CONSUMES
+
+[Depex]
+ TRUE
new file mode 100644
@@ -0,0 +1,352 @@
+/** @file
+ This driver implements EFI_PCI_HOT_PLUG_INIT_PROTOCOL, providing the PCI bus
+ driver with resource padding information, for PCIe hotplug purposes.
+
+ Copyright (C) 2016, Red Hat, Inc.
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#include <IndustryStandard/Acpi10.h>
+
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/PciHotPlugInit.h>
+#include <Protocol/PciRootBridgeIo.h>
+
+//
+// The protocol interface this driver produces.
+//
+// Refer to 12.6 "PCI Hot Plug PCI Initialization Protocol" in the Platform
+// Init 1.4a Spec, Volume 5.
+//
+STATIC EFI_PCI_HOT_PLUG_INIT_PROTOCOL mPciHotPlugInit;
+
+
+//
+// Resource padding template for the GetResourcePadding() protocol member
+// function.
+//
+// Refer to Table 8 "ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage" in
+// the Platform Init 1.4a Spec, Volume 5.
+//
+// This structure is interpreted by the ApplyResourcePadding() function in the
+// edk2 PCI Bus UEFI_DRIVER.
+//
+#pragma pack (1)
+typedef struct {
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR MmioPadding;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR IoPadding;
+ EFI_ACPI_END_TAG_DESCRIPTOR EndDesc;
+} RESOURCE_PADDING;
+#pragma pack ()
+
+STATIC CONST RESOURCE_PADDING mPadding = {
+ //
+ // MmioPadding
+ //
+ {
+ ACPI_ADDRESS_SPACE_DESCRIPTOR, // Desc
+ (UINT16)( // Len
+ sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+ OFFSET_OF (
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+ ResType
+ )
+ ),
+ ACPI_ADDRESS_SPACE_TYPE_MEM, // ResType
+ 0, // GenFlag:
+ // ignored
+ 0, // SpecificFlag:
+ // non-prefetchable
+ 64, // AddrSpaceGranularity:
+ // reserve 64-bit aperture
+ 0, // AddrRangeMin:
+ // ignored
+ SIZE_2MB, // AddrRangeMax:
+ // align at 2MB
+ 0, // AddrTranslationOffset:
+ // ignored
+ SIZE_2MB // AddrLen:
+ // 2MB padding
+ },
+
+ //
+ // IoPadding
+ //
+ {
+ ACPI_ADDRESS_SPACE_DESCRIPTOR, // Desc
+ (UINT16)( // Len
+ sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
+ OFFSET_OF (
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
+ ResType
+ )
+ ),
+ ACPI_ADDRESS_SPACE_TYPE_IO,// ResType
+ 0, // GenFlag:
+ // ignored
+ 0, // SpecificFlag:
+ // ignored
+ 0, // AddrSpaceGranularity:
+ // ignored
+ 0, // AddrRangeMin:
+ // ignored
+ 512, // AddrRangeMax:
+ // align at 512 IO ports
+ 0, // AddrTranslationOffset:
+ // ignored
+ 512 // AddrLen:
+ // 512 IO ports
+ },
+
+ //
+ // EndDesc
+ //
+ {
+ ACPI_END_TAG_DESCRIPTOR, // Desc
+ 0 // Checksum: to be ignored
+ }
+};
+
+
+/**
+ Returns a list of root Hot Plug Controllers (HPCs) that require
+ initialization during the boot process.
+
+ This procedure returns a list of root HPCs. The PCI bus driver must
+ initialize these controllers during the boot process. The PCI bus driver may
+ or may not be able to detect these HPCs. If the platform includes a
+ PCI-to-CardBus bridge, it can be included in this list if it requires
+ initialization. The HpcList must be self consistent. An HPC cannot control
+ any of its parent buses. Only one HPC can control a PCI bus. Because this
+ list includes only root HPCs, no HPC in the list can be a child of another
+ HPC. This policy must be enforced by the EFI_PCI_HOT_PLUG_INIT_PROTOCOL.
+ The PCI bus driver may not check for such invalid conditions. The callee
+ allocates the buffer HpcList
+
+ @param[in] This Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL
+ instance.
+ @param[out] HpcCount The number of root HPCs that were returned.
+ @param[out] HpcList The list of root HPCs. HpcCount defines the number of
+ elements in this list.
+
+ @retval EFI_SUCCESS HpcList was returned.
+ @retval EFI_OUT_OF_RESOURCES HpcList was not returned due to insufficient
+ resources.
+ @retval EFI_INVALID_PARAMETER HpcCount is NULL or HpcList is NULL.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetRootHpcList (
+ IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
+ OUT UINTN *HpcCount,
+ OUT EFI_HPC_LOCATION **HpcList
+ )
+{
+ if (HpcCount == NULL || HpcList == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // There are no top-level (i.e., un-enumerable) hot-plug controllers in QEMU
+ // that would require special initialization.
+ //
+ *HpcCount = 0;
+ *HpcList = NULL;
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Initializes one root Hot Plug Controller (HPC). This process may causes
+ initialization of its subordinate buses.
+
+ This function initializes the specified HPC. At the end of initialization,
+ the hot-plug slots or sockets (controlled by this HPC) are powered and are
+ connected to the bus. All the necessary registers in the HPC are set up. For
+ a Standard (PCI) Hot Plug Controller (SHPC), the registers that must be set
+ up are defined in the PCI Standard Hot Plug Controller and Subsystem
+ Specification.
+
+ @param[in] This Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL
+ instance.
+ @param[in] HpcDevicePath The device path to the HPC that is being
+ initialized.
+ @param[in] HpcPciAddress The address of the HPC function on the PCI bus.
+ @param[in] Event The event that should be signaled when the HPC
+ initialization is complete. Set to NULL if the
+ caller wants to wait until the entire
+ initialization process is complete.
+ @param[out] HpcState The state of the HPC hardware. The state is
+ EFI_HPC_STATE_INITIALIZED or
+ EFI_HPC_STATE_ENABLED.
+
+ @retval EFI_SUCCESS If Event is NULL, the specific HPC was
+ successfully initialized. If Event is not
+ NULL, Event will be signaled at a later time
+ when initialization is complete.
+ @retval EFI_UNSUPPORTED This instance of
+ EFI_PCI_HOT_PLUG_INIT_PROTOCOL does not
+ support the specified HPC.
+ @retval EFI_OUT_OF_RESOURCES Initialization failed due to insufficient
+ resources.
+ @retval EFI_INVALID_PARAMETER HpcState is NULL.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+InitializeRootHpc (
+ IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *HpcDevicePath,
+ IN UINT64 HpcPciAddress,
+ IN EFI_EVENT Event, OPTIONAL
+ OUT EFI_HPC_STATE *HpcState
+ )
+{
+ //
+ // This function should never be called, due to the information returned by
+ // GetRootHpcList().
+ //
+ ASSERT (FALSE);
+
+ if (HpcState == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Returns the resource padding that is required by the PCI bus that is
+ controlled by the specified Hot Plug Controller (HPC).
+
+ This function returns the resource padding that is required by the PCI bus
+ that is controlled by the specified HPC. This member function is called for
+ all the root HPCs and nonroot HPCs that are detected by the PCI bus
+ enumerator. This function will be called before PCI resource allocation is
+ completed. This function must be called after all the root HPCs, with the
+ possible exception of a PCI-to-CardBus bridge, have completed
+ initialization.
+
+ @param[in] This Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL
+ instance.
+ @param[in] HpcDevicePath The device path to the HPC.
+ @param[in] HpcPciAddress The address of the HPC function on the PCI bus.
+ @param[in] HpcState The state of the HPC hardware.
+ @param[out] Padding The amount of resource padding that is required
+ by the PCI bus under the control of the specified
+ HPC.
+ @param[out] Attributes Describes how padding is accounted for. The
+ padding is returned in the form of ACPI 2.0
+ resource descriptors.
+
+ @retval EFI_SUCCESS The resource padding was successfully
+ returned.
+ @retval EFI_UNSUPPORTED This instance of the
+ EFI_PCI_HOT_PLUG_INIT_PROTOCOL does not
+ support the specified HPC.
+ @retval EFI_NOT_READY This function was called before HPC
+ initialization is complete.
+ @retval EFI_INVALID_PARAMETER HpcState or Padding or Attributes is NULL.
+ @retval EFI_OUT_OF_RESOURCES ACPI 2.0 resource descriptors for Padding
+ cannot be allocated due to insufficient
+ resources.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetResourcePadding (
+ IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *HpcDevicePath,
+ IN UINT64 HpcPciAddress,
+ OUT EFI_HPC_STATE *HpcState,
+ OUT VOID **Padding,
+ OUT EFI_HPC_PADDING_ATTRIBUTES *Attributes
+ )
+{
+ DEBUG_CODE (
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *Address;
+ CHAR16 *DevicePathString;
+
+ Address = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&HpcPciAddress;
+ DevicePathString = ConvertDevicePathToText (HpcDevicePath, FALSE, FALSE);
+
+ DEBUG ((EFI_D_VERBOSE, "%a: Address=%02x:%02x.%x DevicePath=%s\n",
+ __FUNCTION__, Address->Bus, Address->Device, Address->Function,
+ (DevicePathString == NULL) ? L"<unavailable>" : DevicePathString));
+
+ if (DevicePathString != NULL) {
+ FreePool (DevicePathString);
+ }
+ );
+
+ if (HpcState == NULL || Padding == NULL || Attributes == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *Padding = AllocateCopyPool (sizeof mPadding, &mPadding);
+ if (*Padding == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Resource padding is required.
+ //
+ *HpcState = EFI_HPC_STATE_INITIALIZED | EFI_HPC_STATE_ENABLED;
+
+ //
+ // The padding should be applied at PCI bus level, and considered by upstream
+ // bridges, recursively.
+ //
+ *Attributes = EfiPaddingPciBus;
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Entry point for this driver.
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SystemTable Pointer to SystemTable.
+
+ @retval EFI_SUCESS Driver has loaded successfully.
+ @retval EFI_UNSUPPORTED The device hotplug feature of the PCI bus driver is
+ disabled.
+ @return Error codes from lower level functions.
+
+**/
+EFI_STATUS
+EFIAPI
+DriverInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ if (!FeaturePcdGet (PcdPciBusHotplugDeviceSupport)) {
+ DEBUG ((EFI_D_WARN,
+ "%a: this driver should not have been built into the firmware\n",
+ gEfiCallerBaseName));
+ return EFI_UNSUPPORTED;
+ }
+
+ mPciHotPlugInit.GetRootHpcList = GetRootHpcList;
+ mPciHotPlugInit.InitializeRootHpc = InitializeRootHpc;
+ mPciHotPlugInit.GetResourcePadding = GetResourcePadding;
+ Status = gBS->InstallMultipleProtocolInterfaces (&ImageHandle,
+ &gEfiPciHotPlugInitProtocolGuid, &mPciHotPlugInit, NULL);
+ return Status;
+}
After IncompatiblePciDeviceSupportDxe, this is another small driver / protocol implementation that tweaks the behavior of the PCI bus driver in edk2. The protocol is specified in the Platform Init Spec v1.4a, Volume 5, Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This implementation steers the PCI bus driver to reserve the following resources ("padding") for each PCI bus, in addition to the BARs of the devices on that PCI bus: - 2MB of 64-bit non-prefetchable MMIO aperture, - 512B of IO port space. The goal is to reserve room for devices hot-plugged at runtime even if the bridge receiving the device is empty at boot time. The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is actually only 1/8th of the PCI spec mandated reservation, but the specified size of 4096 has proved wasteful (given the limited size of our IO port space -- see commit bba734ab4c7c). Especially on Q35, where every PCIe root port and downstream port qualifies as a separate bridge (capable of accepting a single device). Test results for this patch: - regardless of our request for 64-bit MMIO reservation, it is downgraded to 32-bit, - although we request 512B alignment for the IO port space reservation, the next upstream bridge rounds it up to 4096B. Cc: "Johnson, Brian J." <bjohnson@sgi.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrew Fish <afish@apple.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Suggested-by: Andrew Fish <afish@apple.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> --- OvmfPkg/OvmfPkgIa32.dsc | 1 + OvmfPkg/OvmfPkgIa32X64.dsc | 1 + OvmfPkg/OvmfPkgX64.dsc | 1 + OvmfPkg/OvmfPkgIa32.fdf | 1 + OvmfPkg/OvmfPkgIa32X64.fdf | 1 + OvmfPkg/OvmfPkgX64.fdf | 1 + OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf | 46 +++ OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.c | 352 ++++++++++++++++++++ 8 files changed, 404 insertions(+) -- 1.8.3.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel