@@ -5,429 +5,10 @@
/dts-v1/;
-/* PMK8350 is configured to use SID6 instead of 0 */
-#define PMK8350_SID 6
-
-#include <dt-bindings/gpio/gpio.h>
-#include "sm6375.dtsi"
-#include "pm6125.dtsi"
-#include "pmk8350.dtsi"
-#include "pmr735a.dtsi"
-
-/* PM6125 PON is used and we can't have duplicate labels */
-/delete-node/ &pmk8350_pon;
+#include "sm6375-sony-xperia-murray.dtsi"
/ {
model = "Sony Xperia 10 IV";
compatible = "sony,pdx225", "qcom,sm6375";
chassis-type = "handset";
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- framebuffer: framebuffer@85200000 {
- compatible = "simple-framebuffer";
- reg = <0 0x85200000 0 0xc00000>;
-
- width = <1080>;
- height = <2520>;
- stride = <(1080 * 4)>;
- format = "a8r8g8b8";
- /*
- * That's (going to be) a lot of clocks, but it's necessary due
- * to unused clk cleanup & no panel driver yet
- */
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
- <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
- <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- label = "gpio-keys";
-
- pinctrl-0 = <&vol_down_n>;
- pinctrl-names = "default";
-
- key-volume-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <15>;
- linux,can-disable;
- wakeup-source;
- };
- };
-
- reserved-memory {
- cont_splash_mem: memory@85200000 {
- reg = <0 0x85200000 0 0xc00000>;
- no-map;
- };
-
- ramoops@ffc40000 {
- compatible = "ramoops";
- reg = <0 0xffc40000 0 0xb0000>;
- record-size = <0x10000>;
- console-size = <0x60000>;
- ftrace-size = <0x10000>;
- pmsg-size = <0x20000>;
- ecc-size = <16>;
- };
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&sdc2_off_state {
- sd-cd-pins {
- pins = "gpio94";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&sdc2_on_state {
- sd-cd-pins {
- pins = "gpio94";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-};
-
-&sdhc_2 {
- status = "okay";
-
- vmmc-supply = <&pm6125_l22>;
- vqmmc-supply = <&pm6125_l5>;
-
- cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
-};
-
-&gpi_dma0 {
- status = "okay";
-};
-
-&gpi_dma1 {
- status = "okay";
-};
-
-&i2c8 {
- clock-frequency = <400000>;
- status = "okay";
-
- touchscreen@48 {
- compatible = "samsung,s6sy761";
- reg = <0x48>;
- interrupt-parent = <&tlmm>;
- interrupts = <22 0x2008>;
-
- vdd-supply = <&pm6125_l13>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_default &ts_avdd_default>;
- };
-};
-
-&pmk8350_adc_tm {
- status = "okay";
-};
-
-&pmk8350_rtc {
- status = "okay";
-};
-
-&pmr735a_gpios {
- vol_down_n: vol-down-n-state {
- pins = "gpio1";
- function = "normal";
- power-source = <1>;
- bias-pull-up;
- input-enable;
- };
-};
-
-&pon_pwrkey {
- status = "okay";
-};
-
-&pon_resin {
- linux,code = <KEY_VOLUMEUP>;
- status = "okay";
-};
-
-&qupv3_id_0 {
- status = "okay";
-};
-
-&qupv3_id_1 {
- status = "okay";
-};
-
-&remoteproc_adsp {
- firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
- status = "okay";
-};
-
-&remoteproc_cdsp {
- firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
- status = "okay";
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm6125-regulators";
-
- pm6125_s5: s5 {
- regulator-min-microvolt = <382000>;
- regulator-max-microvolt = <1120000>;
- };
-
- pm6125_s6: s6 {
- regulator-min-microvolt = <320000>;
- regulator-max-microvolt = <1374000>;
- };
-
- pm6125_s7: s7 {
- regulator-min-microvolt = <1574000>;
- regulator-max-microvolt = <2040000>;
- };
-
- /*
- * S8 is VDD_GFX
- * L1 is VDD_LPI_CX
- */
-
- pm6125_l2: l2 {
- regulator-min-microvolt = <1170000>;
- regulator-max-microvolt = <1304000>;
- };
-
- pm6125_l3: l3 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pm6125_l4: l4 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pm6125_l5: l5 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <2960000>;
- regulator-allow-set-load;
- };
-
- pm6125_l6: l6 {
- regulator-min-microvolt = <1080000>;
- regulator-max-microvolt = <1304000>;
- };
-
- pm6125_l7: l7 {
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm6125_l8: l8 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1304000>;
- };
-
- pm6125_l9: l9 {
- regulator-min-microvolt = <1504000>;
- regulator-max-microvolt = <2000000>;
- };
-
- pm6125_l10: l10 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- };
-
- pm6125_l11: l11 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- };
-
- pm6125_l12: l12 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <2000000>;
- };
-
- pm6125_l13: l13 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1980000>;
- };
-
- pm6125_l14: l14 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- };
-
- pm6125_l15: l15 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3544000>;
- };
-
- pm6125_l16: l16 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- };
-
- /* L17 is VDD_LPI_MX */
-
- pm6125_l18: l18 {
- regulator-min-microvolt = <830000>;
- regulator-max-microvolt = <920000>;
- };
-
- pm6125_l19: l19 {
- regulator-min-microvolt = <1624000>;
- regulator-max-microvolt = <3304000>;
- };
-
- pm6125_l20: l20 {
- regulator-min-microvolt = <1624000>;
- regulator-max-microvolt = <3304000>;
- };
-
- pm6125_l21: l21 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3400000>;
- };
-
- pm6125_l22: l22 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-allow-set-load;
- };
-
- pm6125_l23: l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3400000>;
- };
-
- pm6125_l24: l24 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <3544000>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pmr735a-regulators";
-
- /*
- * S1 is VDD_MX
- * S2 is VDD_CX
- */
-
- pmr735a_l1: l1 {
- regulator-min-microvolt = <570000>;
- regulator-max-microvolt = <650000>;
- };
-
- pmr735a_l2: l2 {
- regulator-min-microvolt = <352000>;
- regulator-max-microvolt = <796000>;
- };
-
- pmr735a_l3: l3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pmr735a_l4: l4 {
- regulator-min-microvolt = <1504000>;
- regulator-max-microvolt = <2000000>;
- };
-
- pmr735a_l5: l5 {
- regulator-min-microvolt = <751000>;
- regulator-max-microvolt = <824000>;
- };
-
- pmr735a_l6: l6 {
- regulator-min-microvolt = <504000>;
- regulator-max-microvolt = <868000>;
- };
-
- pmr735a_l7: l7 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- };
- };
-};
-
-&sdc2_off_state {
- sd-cd-pins {
- pins = "gpio94";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&sdc2_on_state {
- sd-cd-pins {
- pins = "gpio94";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-};
-
-&sdhc_2 {
- status = "okay";
-
- vmmc-supply = <&pm6125_l22>;
- vqmmc-supply = <&pm6125_l5>;
-
- cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
-};
-
-&tlmm {
- gpio-reserved-ranges = <13 4>;
-
- ts_int_default: ts-int-default-state {
- pins = "gpio22";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- ts_avdd_default: ts-avdd-default-state {
- pins = "gpio59";
- function = "gpio";
- drive-strength = <8>;
- output-high;
- };
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
- status = "okay";
-};
-
-&xo_board_clk {
- clock-frequency = <19200000>;
};
new file mode 100644
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pm6125.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/* PM6125 PON is used and we can't have duplicate labels */
+/delete-node/ &pmk8350_pon;
+
+/ {
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@85200000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x85200000 0 0xc00000>;
+
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet
+ */
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-0 = <&vol_down_n>;
+ pinctrl-names = "default";
+
+ key-volume-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@85200000 {
+ reg = <0 0x85200000 0 0xc00000>;
+ no-map;
+ };
+
+ ramoops@ffc40000 {
+ compatible = "ramoops";
+ reg = <0 0xffc40000 0 0xb0000>;
+ record-size = <0x10000>;
+ console-size = <0x60000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&sdc2_off_state {
+ sd-cd-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_on_state {
+ sd-cd-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm6125_l22>;
+ vqmmc-supply = <&pm6125_l5>;
+
+ cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <22 0x2008>;
+
+ vdd-supply = <&pm6125_l13>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+ };
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmr735a_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ pm6125_s5: s5 {
+ regulator-min-microvolt = <382000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ pm6125_s6: s6 {
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <1374000>;
+ };
+
+ pm6125_s7: s7 {
+ regulator-min-microvolt = <1574000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ /*
+ * S8 is VDD_GFX
+ * L1 is VDD_LPI_CX
+ */
+
+ pm6125_l2: l2 {
+ regulator-min-microvolt = <1170000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l3: l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm6125_l4: l4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm6125_l5: l5 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ };
+
+ pm6125_l6: l6 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l7: l7 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm6125_l8: l8 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l9: l9 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm6125_l10: l10 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l11: l11 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l12: l12 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm6125_l13: l13 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l14: l14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm6125_l15: l15 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm6125_l16: l16 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ /* L17 is VDD_LPI_MX */
+
+ pm6125_l18: l18 {
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <920000>;
+ };
+
+ pm6125_l19: l19 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l20: l20 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l21: l21 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ pm6125_l22: l22 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ };
+
+ pm6125_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ pm6125_l24: l24 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pmr735a-regulators";
+
+ /*
+ * S1 is VDD_MX
+ * S2 is VDD_CX
+ */
+
+ pmr735a_l1: l1 {
+ regulator-min-microvolt = <570000>;
+ regulator-max-microvolt = <650000>;
+ };
+
+ pmr735a_l2: l2 {
+ regulator-min-microvolt = <352000>;
+ regulator-max-microvolt = <796000>;
+ };
+
+ pmr735a_l3: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: l4 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pmr735a_l5: l5 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ };
+
+ pmr735a_l6: l6 {
+ regulator-min-microvolt = <504000>;
+ regulator-max-microvolt = <868000>;
+ };
+
+ pmr735a_l7: l7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+};
+
+&sdc2_off_state {
+ sd-cd-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_on_state {
+ sd-cd-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm6125_l22>;
+ vqmmc-supply = <&pm6125_l5>;
+
+ cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <13 4>;
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_avdd_default: ts-avdd-default-state {
+ pins = "gpio59";
+ function = "gpio";
+ drive-strength = <8>;
+ output-high;
+ };
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <19200000>;
+};
There's a new kid in the Murray family, let's make space for it! Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../dts/qcom/sm6375-sony-xperia-murray-pdx225.dts | 421 +------------------- .../boot/dts/qcom/sm6375-sony-xperia-murray.dtsi | 427 +++++++++++++++++++++ 2 files changed, 428 insertions(+), 420 deletions(-)