diff mbox series

gpio: pcf857x: Extend match data support for OF tables

Message ID 20230819180443.16718-1-biju.das.jz@bp.renesas.com
State Accepted
Commit db3b16dcc7e4f5bfbe35806a54fb15dc858d19f8
Headers show
Series gpio: pcf857x: Extend match data support for OF tables | expand

Commit Message

Biju Das Aug. 19, 2023, 6:04 p.m. UTC
The driver has OF match table, but still it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. Extend match data support for OF tables by using
i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
making similar OF/ID tables.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
Note:
 This patch is only compile tested.
---
 drivers/gpio/gpio-pcf857x.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

Comments

Andy Shevchenko Aug. 21, 2023, 1:09 p.m. UTC | #1
On Sat, Aug 19, 2023 at 07:04:43PM +0100, Biju Das wrote:
> The driver has OF match table, but still it uses an ID lookup table for
> retrieving match data. Currently, the driver is working on the
> assumption that an I2C device registered via OF will always match a
> legacy I2C device ID. Extend match data support for OF tables by using
> i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
> making similar OF/ID tables.

OK.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Bartosz Golaszewski Aug. 22, 2023, 9:41 a.m. UTC | #2
On Sat, Aug 19, 2023 at 8:04 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
> The driver has OF match table, but still it uses an ID lookup table for
> retrieving match data. Currently, the driver is working on the
> assumption that an I2C device registered via OF will always match a
> legacy I2C device ID. Extend match data support for OF tables by using
> i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
> making similar OF/ID tables.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---

Applied, thanks!

Bart
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index c4c785548408..53b69abe6787 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -36,19 +36,19 @@  static const struct i2c_device_id pcf857x_id[] = {
 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
 
 static const struct of_device_id pcf857x_of_table[] = {
-	{ .compatible = "nxp,pcf8574" },
-	{ .compatible = "nxp,pcf8574a" },
-	{ .compatible = "nxp,pca8574" },
-	{ .compatible = "nxp,pca9670" },
-	{ .compatible = "nxp,pca9672" },
-	{ .compatible = "nxp,pca9674" },
-	{ .compatible = "nxp,pcf8575" },
-	{ .compatible = "nxp,pca8575" },
-	{ .compatible = "nxp,pca9671" },
-	{ .compatible = "nxp,pca9673" },
-	{ .compatible = "nxp,pca9675" },
-	{ .compatible = "maxim,max7328" },
-	{ .compatible = "maxim,max7329" },
+	{ .compatible = "nxp,pcf8574", (void *)8 },
+	{ .compatible = "nxp,pcf8574a", (void *)8 },
+	{ .compatible = "nxp,pca8574", (void *)8 },
+	{ .compatible = "nxp,pca9670", (void *)8 },
+	{ .compatible = "nxp,pca9672", (void *)8 },
+	{ .compatible = "nxp,pca9674", (void *)8 },
+	{ .compatible = "nxp,pcf8575", (void *)16 },
+	{ .compatible = "nxp,pca8575", (void *)16 },
+	{ .compatible = "nxp,pca9671", (void *)16 },
+	{ .compatible = "nxp,pca9673", (void *)16 },
+	{ .compatible = "nxp,pca9675", (void *)16 },
+	{ .compatible = "maxim,max7328", (void *)8 },
+	{ .compatible = "maxim,max7329", (void *)8 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pcf857x_of_table);
@@ -272,7 +272,6 @@  static const struct irq_chip pcf857x_irq_chip = {
 
 static int pcf857x_probe(struct i2c_client *client)
 {
-	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct pcf857x *gpio;
 	unsigned int n_latch = 0;
 	int status;
@@ -296,7 +295,7 @@  static int pcf857x_probe(struct i2c_client *client)
 	gpio->chip.set_multiple		= pcf857x_set_multiple;
 	gpio->chip.direction_input	= pcf857x_input;
 	gpio->chip.direction_output	= pcf857x_output;
-	gpio->chip.ngpio		= id->driver_data;
+	gpio->chip.ngpio		= (uintptr_t)i2c_get_match_data(client);
 
 	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
 	 * these parts, notably for output.  It has a low-resolution