| Message ID | 20230821192714.3104006-1-florian.fainelli@broadcom.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm: dts: bcm2711: Describe Ethernet LEDs | expand |
Hi Florian, Am 21.08.23 um 21:27 schrieb Florian Fainelli: > Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well > as the Raspberry Pi 4 CM board. > > Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> > --- > arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 18 ++++++++++++++++++ > .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi | 18 ++++++++++++++++++ > 2 files changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > index d5f8823230db..41db78cb0836 100644 > --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts > @@ -5,6 +5,7 @@ > #include "bcm283x-rpi-led-deprecated.dtsi" > #include "bcm283x-rpi-usb-peripheral.dtsi" > #include "bcm283x-rpi-wifi-bt.dtsi" > +#include <dt-bindings/leds/common.h> > > / { > compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; > @@ -197,6 +198,23 @@ &genet_mdio { > phy1: ethernet-phy@1 { > /* No PHY interrupt */ > reg = <0x1>; > + > + leds { > + #address-cells = <1>; > + #size-cells = <0>; > + > + leds@0 { > + color = <LED_COLOR_ID_GREEN>; > + default-state = "keep"; > + reg = <0>; > + }; > + > + leds@1 { > + color = <LED_COLOR_ID_AMBER>; > + default-state = "keep"; > + reg = <1>; > + }; > + }; the Raspberry Pi 400 Ethernet Jack doesn't have LEDs, but the bcm2711-rpi-400.dts does include bcm2711-rpi-4.dtb. So this complete new node must be deleted there. Best regards > }; > };
On 8/22/23 06:18, Andrew Lunn wrote: > On Mon, Aug 21, 2023 at 12:27:11PM -0700, Florian Fainelli wrote: >> Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well >> as the Raspberry Pi 4 CM board. >> >> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> >> --- >> arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 18 ++++++++++++++++++ >> .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi | 18 ++++++++++++++++++ >> 2 files changed, 36 insertions(+) >> >> diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts >> index d5f8823230db..41db78cb0836 100644 >> --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts >> +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts >> @@ -5,6 +5,7 @@ >> #include "bcm283x-rpi-led-deprecated.dtsi" >> #include "bcm283x-rpi-usb-peripheral.dtsi" >> #include "bcm283x-rpi-wifi-bt.dtsi" >> +#include <dt-bindings/leds/common.h> >> >> / { >> compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; >> @@ -197,6 +198,23 @@ &genet_mdio { >> phy1: ethernet-phy@1 { >> /* No PHY interrupt */ >> reg = <0x1>; >> + >> + leds { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + leds@0 { >> + color = <LED_COLOR_ID_GREEN>; >> + default-state = "keep"; >> + reg = <0>; >> + }; >> + >> + leds@1 { >> + color = <LED_COLOR_ID_AMBER>; >> + default-state = "keep"; >> + reg = <1>; > > Hi Florian > > When we submitted leds in DT nodes as part of the merge, Rob wanted > the function property set. armada-370-rd.dts has: > > function = LED_FUNCTION_WAN > > because that port would typically be connected to your cable router > etc. But LED_FUNCTION_LAN also exists. This property can influence > naming so adding it later could be an ABI violation. So in this case, the amber LED indicates the link activity, and the green LED indicates the link status. AFAICT we still do not have function names defined for those, the closest I can think is to do: function = LED_FUNCTION_ACTIVITY for the amber LED and for the green LED: function = (LED_FUNCTION_RX | LED_FUNCTION_TX) is that acceptable?
> So in this case, the amber LED indicates the link activity, and the green > LED indicates the link status. AFAICT we still do not have function names > defined for those, the closest I can think is to do: > > function = LED_FUNCTION_ACTIVITY for the amber LED > > and for the green LED: > > function = (LED_FUNCTION_RX | LED_FUNCTION_TX) > > is that acceptable? I have a WIP DT binding for exact meaning of the LED. https://github.com/lunn/linux v6.5-rc4-net-next-led-bindings It is too late for this merge window, so i will likely post it as an RFC in a weeks time. We probably need a discussion, LED_FUNCTION_LAN gives the high level description, and contributes to the naming, and then this binding gives the specific meaning of the LED? Or do we want to define LED_FUNCTION_* for details? Andrew
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index d5f8823230db..41db78cb0836 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -5,6 +5,7 @@ #include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -197,6 +198,23 @@ &genet_mdio { phy1: ethernet-phy@1 { /* No PHY interrupt */ reg = <0x1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + leds@0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "keep"; + reg = <0>; + }; + + leds@1 { + color = <LED_COLOR_ID_AMBER>; + default-state = "keep"; + reg = <1>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi index 48e63ab7848c..3860a134d31a 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi @@ -3,6 +3,7 @@ #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; @@ -91,6 +92,23 @@ &genet_mdio { phy1: ethernet-phy@0 { /* No PHY interrupt */ reg = <0x0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + leds@1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "keep"; + reg = <1>; + }; + + leds@2 { + color = <LED_COLOR_ID_AMBER>; + default-state = "keep"; + reg = <2>; + }; + }; }; };
Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well as the Raspberry Pi 4 CM board. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> --- arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 18 ++++++++++++++++++ .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi | 18 ++++++++++++++++++ 2 files changed, 36 insertions(+)