Message ID | 20230822200626.1931129-9-bryan.odonoghue@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | media: qcom: camss: Bugfix series | expand |
Hi Bryan, Thank you for the patch. On Tue, Aug 22, 2023 at 09:06:25PM +0100, Bryan O'Donoghue wrote: > VC_MODE = 0 implies a two bit VC address. > VC_MODE = 1 is required for VCs with a larger address than two bits. > > Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") > Cc: stable@vger.kernel.org > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > drivers/media/platform/qcom/camss/camss-csid-gen2.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c > index 45c7986d4a8d0..140c584bfb8b1 100644 > --- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c > +++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c > @@ -449,6 +449,8 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc) > writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0); > > val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN; > + if (vc > 3) > + val |= 1 << CSI2_RX_CFG1_VC_MODE; It looks like CSI2_RX_CFG1_VC_MODE should be defined as BIT(2) instead of 2, and this line should drop the '1 <<'. Same for lots of other bits. Could you fix this in a separate patch ? Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > val |= 1 << CSI2_RX_CFG1_MISR_EN; > writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1); >
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c index 45c7986d4a8d0..140c584bfb8b1 100644 --- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c +++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c @@ -449,6 +449,8 @@ static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc) writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0); val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN; + if (vc > 3) + val |= 1 << CSI2_RX_CFG1_VC_MODE; val |= 1 << CSI2_RX_CFG1_MISR_EN; writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
VC_MODE = 0 implies a two bit VC address. VC_MODE = 1 is required for VCs with a larger address than two bits. Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/media/platform/qcom/camss/camss-csid-gen2.c | 2 ++ 1 file changed, 2 insertions(+)