diff mbox series

[11/11] ARM: dts: exynos: disable polling in Odroid XU3-related devices

Message ID 20230829091853.626011-12-m.majewski2@samsung.com
State Superseded
Headers show
Series [01/11] ARM: dts: exynos: enable polling in Exynos 4210 | expand

Commit Message

Mateusz Majewski Aug. 29, 2023, 9:18 a.m. UTC
After having switched to dynamic trip points, we no longer have a
hardware limit for trip point count and can support as many as we want
without polling.

Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
---
 .../dts/samsung/exynos5422-odroidxu3-common.dtsi | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

Comments

Krzysztof Kozlowski Aug. 29, 2023, 10:07 a.m. UTC | #1
On 29/08/2023 11:18, Mateusz Majewski wrote:
> After having switched to dynamic trip points, we no longer have a
> hardware limit for trip point count and can support as many as we want
> without polling.
> 
> Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
> ---
>  .../dts/samsung/exynos5422-odroidxu3-common.dtsi | 16 +++++-----------
>  1 file changed, 5 insertions(+), 11 deletions(-)
> 

This will need to wait for release after driver changes get accepted.
You sent your patchset just after merge window started, so unfortunately
this means it will get in 2 releases.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
index b4a851aa8881..4a4c55a4beb3 100644
--- a/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
@@ -55,7 +55,7 @@  fan0: pwm-fan {
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			thermal-sensors = <&tmu_cpu0>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
@@ -78,12 +78,6 @@  cpu0_crit0: cpu-crit-0 {
 					hysteresis = <0>; /* millicelsius */
 					type = "critical";
 				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
 				cpu0_alert3: cpu-alert-3 {
 					temperature = <70000>; /* millicelsius */
 					hysteresis = <10000>; /* millicelsius */
@@ -144,7 +138,7 @@  cpu0_cooling_map4: map4 {
 		};
 		cpu1_thermal: cpu1-thermal {
 			thermal-sensors = <&tmu_cpu1>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
@@ -217,7 +211,7 @@  cpu1_cooling_map4: map4 {
 		};
 		cpu2_thermal: cpu2-thermal {
 			thermal-sensors = <&tmu_cpu2>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
@@ -290,7 +284,7 @@  cpu2_cooling_map4: map4 {
 		};
 		cpu3_thermal: cpu3-thermal {
 			thermal-sensors = <&tmu_cpu3>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
@@ -363,7 +357,7 @@  cpu3_cooling_map4: map4 {
 		};
 		gpu_thermal: gpu-thermal {
 			thermal-sensors = <&tmu_gpu>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				gpu_alert0: gpu-alert-0 {