diff mbox series

[13/21] hte: tegra194: improve the GPIO-related comment

Message ID 20230905185309.131295-14-brgl@bgdev.pl
State New
Headers show
Series gpio: convert users to gpio_device_find() and remove gpiochip_find() | expand

Commit Message

Bartosz Golaszewski Sept. 5, 2023, 6:53 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Using any of the GPIO interfaces using the global numberspace is
deprecated. Make it clear in the comment.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/hte/hte-tegra194.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

Comments

Linus Walleij Sept. 7, 2023, 7:24 a.m. UTC | #1
On Tue, Sep 5, 2023 at 8:53 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:

> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Using any of the GPIO interfaces using the global numberspace is
> deprecated. Make it clear in the comment.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Split this off and send separately to Dipen.
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/hte/hte-tegra194.c b/drivers/hte/hte-tegra194.c
index 6fe6897047ac..9fd3c00ff695 100644
--- a/drivers/hte/hte-tegra194.c
+++ b/drivers/hte/hte-tegra194.c
@@ -407,12 +407,15 @@  static int tegra_hte_line_xlate(struct hte_chip *gc,
 		return -EINVAL;
 
 	/*
+	 * GPIO consumers can access GPIOs in two ways:
 	 *
-	 * There are two paths GPIO consumers can take as follows:
-	 * 1) The consumer (gpiolib-cdev for example) which uses GPIO global
-	 * number which gets assigned run time.
-	 * 2) The consumer passing GPIO from the DT which is assigned
-	 * statically for example by using TEGRA194_AON_GPIO gpio DT binding.
+	 * 1) Using the global GPIO numberspace.
+	 *
+	 * This is the old, now DEPRECATED method and should not be used in
+	 * new code. TODO: Check if tegra is even concerned by this.
+	 *
+	 * 2) Using GPIO descriptors that can be assigned to consumer devices
+	 * using device-tree, ACPI or lookup tables.
 	 *
 	 * The code below addresses both the consumer use cases and maps into
 	 * HTE/GTE namespace.