@@ -13,7 +13,7 @@ Handling clocks
Camera sensors have an internal clock tree including a PLL and a number of
divisors. The clock tree is generally configured by the driver based on a few
-input parameters that are specific to the hardware:: the external clock frequency
+input parameters that are specific to the hardware: the external clock frequency
and the link frequency. The two parameters generally are obtained from system
firmware. **No other frequencies should be used in any circumstances.**
@@ -123,7 +123,7 @@ Power management
Always use runtime PM to manage the power states of your device. Camera sensor
drivers are in no way special in this respect: they are responsible for
controlling the power state of the device they otherwise control as well. In
-general, the device must be powered on at least when its registers are being
+general, the device shall be powered on at least when its registers are being
accessed and when it is streaming.
Existing camera sensor drivers may rely on the old
Drop an unneeded double colon, and use 'shall' instead of 'must' for consistency with the rest of the file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Documentation/driver-api/media/camera-sensor.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)