| Message ID | 20230921135136.97491-3-macroalpha82@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [V5,1/4] arm: dts: sun8i: V3s: Add pinctrl for pwm | expand |
Dne četrtek, 21. september 2023 ob 15:51:34 CEST je Chris Morgan napisal(a): > From: Chris Morgan <macromorgan@hotmail.com> > > Add the EHCI and OHCI controller to the Allwinner v3s to support using > USB in host mode. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej > --- > arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi > index c87476ea31e2..e8a04476b776 100644 > --- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi > +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi > @@ -319,6 +319,29 @@ usbphy: phy@1c19400 { > #phy-cells = <1>; > }; > > + ehci: usb@1c1a000 { > + compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci"; > + reg = <0x01c1a000 0x100>; > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; > + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; > + phys = <&usbphy 0>; > + phy-names = "usb"; > + status = "disabled"; > + }; > + > + ohci: usb@1c1a400 { > + compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci"; > + reg = <0x01c1a400 0x100>; > + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, > + <&ccu CLK_USB_OHCI0>; > + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; > + phys = <&usbphy 0>; > + phy-names = "usb"; > + status = "disabled"; > + }; > + > ccu: clock@1c20000 { > compatible = "allwinner,sun8i-v3s-ccu"; > reg = <0x01c20000 0x400>; >
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi index c87476ea31e2..e8a04476b776 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi @@ -319,6 +319,29 @@ usbphy: phy@1c19400 { #phy-cells = <1>; }; + ehci: usb@1c1a000 { + compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci: usb@1c1a400 { + compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>;