@@ -2626,14 +2626,14 @@ opp-315000000 {
opp-hz = /bits/ 64 <315000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <1804000>;
- opp-supported-hw = <0x03>;
+ opp-supported-hw = <0x07>;
};
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <4068000>;
- opp-supported-hw = <0x03>;
+ opp-supported-hw = <0x07>;
};
/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2648,28 +2648,28 @@ opp-550000000-1 {
opp-hz = /bits/ 64 <550000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <6832000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-608000000 {
opp-hz = /bits/ 64 <608000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-peak-kBps = <8368000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <8532000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-812000000 {
opp-hz = /bits/ 64 <812000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <8532000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-840000000 {
A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the opp-supported-hw appropriately. Note that fuseval 0xac is referred to as speedbin 1 downstream, but that was already in use upstream, so 2 was chosen instead. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)