@@ -520,12 +520,14 @@ static inline void spitz_leds_init(void) {}
* SSP Devices
******************************************************************************/
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct gpio_desc *hsync = NULL;
+
static void spitz_ads7846_wait_for_hsync(void)
{
- while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ while (gpiod_get_value(hsync))
cpu_relax();
- while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ while (!gpiod_get_value(hsync))
cpu_relax();
}
@@ -543,6 +545,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
.table = {
GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
"pendown", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_HSYNC,
+ "hsync", GPIO_ACTIVE_LOW),
{ }
},
};
@@ -622,6 +626,11 @@ static void __init spitz_spi_init(void)
gpiod_add_lookup_table(&spitz_ads7846_gpio_table);
gpiod_add_lookup_table(&spitz_spi_gpio_table);
+ hsync = gpiod_get(NULL, "hsync", GPIOD_IN);
+ if (IS_ERR(hsync)) {
+ pr_err("Failed to get hsync GPIO: %ld\n", PTR_ERR(hsync));
+ return;
+ }
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
}
Sharp's Spitz still uses the legacy GPIO interface in its wait_for_hsync() function. Convert it to use the GPIO descriptor interface. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- arch/arm/mach-pxa/spitz.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)