diff mbox series

[v2,2/3] iio: imu: mpu6050: add level shifter flag

Message ID 20230926203739.2119963-3-andreas@kemnade.info
State New
Headers show
Series ARM: omap: omap4-embt2ws: Add IMU on control unit | expand

Commit Message

Andreas Kemnade Sept. 26, 2023, 8:37 p.m. UTC
Some boards fail in magnetometer probe if level shifter flag is not set,
definition was found in a 3.0 vendor kernel.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 10 ++++++++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |  3 +++
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  1 +
 3 files changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
index 7327e5723f961..1d30360f1d482 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -71,6 +71,16 @@  int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
 	unsigned int val;
 	int ret;
 
+	/* code based on a 3.0 vendor kernel, the exact meaning is unknown */
+	if (st->chip_type == INV_MPU9150) {
+		unsigned int mask = BIT(7);
+
+		val = st->level_shifter ? mask : 0;
+		ret = regmap_update_bits(st->map, 0x1, mask, val);
+		if (ret)
+			return ret;
+	}
+
 	/* configure i2c master */
 	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
 			INV_MPU6050_BIT_WAIT_FOR_ES;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 29f906c884bd8..3fbeef1a70186 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -17,6 +17,7 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/iio/iio.h>
@@ -1495,6 +1496,8 @@  int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	st->irq = irq;
 	st->map = regmap;
 
+	st->level_shifter = device_property_read_bool(dev,
+						      "invensense,level-shifter");
 	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		result = iio_read_mount_matrix(dev, &st->orientation);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ed5a96e78df05..7eba1439c8093 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -203,6 +203,7 @@  struct inv_mpu6050_state {
 	s32 magn_raw_to_gauss[3];
 	struct iio_mount_matrix magn_orient;
 	unsigned int suspended_sensors;
+	bool level_shifter;
 	u8 *data;
 };