diff mbox series

[v2,1/2] spi: renesas,rzv2m-csi: Add CSI (SPI) target related property

Message ID 20230927162508.328736-2-fabrizio.castro.jz@renesas.com
State Accepted
Commit 4056d88866e5941ebd15fb2523119f0ddc5186da
Headers show
Series [v2,1/2] spi: renesas,rzv2m-csi: Add CSI (SPI) target related property | expand

Commit Message

Fabrizio Castro Sept. 27, 2023, 4:25 p.m. UTC
The CSI IP found inside the Renesas RZ/V2M SoC can also work
in SPI target mode.
When working in target mode, the IP will make use of the SS
(Slave Selection) pin, with "low" as default active level.
The active level of SS can be changed to "high" upon setting
property "spi-cs-high" to true.
By default, the SS will be used in target mode, unless property
"renesas,csi-no-ss" is set to true, in which case data will be
shifted in and out purely based on clock activity, and the
logic level of the SS pin will be completely ignored.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
v1->v2: I have dropped properties renesas,csi-ss and
        renesas,csi-ss-high. I have added property
	renesas,csi-no-ss, and to configure SS as active
	high one now needs to use property spi-cs-high.
	I have also reworded the changelog to use a more
	modern terminology (host and target as opposed to
	master and slave).

 .../devicetree/bindings/spi/renesas,rzv2m-csi.yaml       | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Rob Herring (Arm) Sept. 28, 2023, 6:32 p.m. UTC | #1
On Wed, 27 Sep 2023 17:25:07 +0100, Fabrizio Castro wrote:
> The CSI IP found inside the Renesas RZ/V2M SoC can also work
> in SPI target mode.
> When working in target mode, the IP will make use of the SS
> (Slave Selection) pin, with "low" as default active level.
> The active level of SS can be changed to "high" upon setting
> property "spi-cs-high" to true.
> By default, the SS will be used in target mode, unless property
> "renesas,csi-no-ss" is set to true, in which case data will be
> shifted in and out purely based on clock activity, and the
> logic level of the SS pin will be completely ignored.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> ---
> v1->v2: I have dropped properties renesas,csi-ss and
>         renesas,csi-ss-high. I have added property
> 	renesas,csi-no-ss, and to configure SS as active
> 	high one now needs to use property spi-cs-high.
> 	I have also reworded the changelog to use a more
> 	modern terminology (host and target as opposed to
> 	master and slave).
> 
>  .../devicetree/bindings/spi/renesas,rzv2m-csi.yaml       | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
index e59183e53690..bed829837df1 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
@@ -39,6 +39,12 @@  properties:
   power-domains:
     maxItems: 1
 
+  renesas,csi-no-ss:
+    type: boolean
+    description:
+      The CSI Slave Selection (SS) pin won't be used to enable transmission and
+      reception. Only available when in target mode.
+
 required:
   - compatible
   - reg
@@ -50,6 +56,9 @@  required:
   - '#address-cells'
   - '#size-cells'
 
+dependencies:
+  renesas,csi-no-ss: [ spi-slave ]
+
 unevaluatedProperties: false
 
 examples: