| Message ID | d5bf0d4ac79bd447d78adad743ed5ae7e8f47048.1696157794.git.pav@iki.fi |
|---|---|
| State | New |
| Headers | show |
| Series | [BlueZ,1/2] bap: use documented MediaEndpoint property names consistently | expand |
Hi Pauli, On Sun, Oct 1, 2023 at 5:06 AM Pauli Virtanen <pav@iki.fi> wrote: > > Document the actual input and output parameter values used in > SelectProperties. These differ from SetConfiguration. > > Mention SelectProperties is used for unicast only. > > Document SetConfiguration input parameters. > --- > doc/org.bluez.MediaEndpoint.rst | 42 ++++++++++++++++++++++++++------- > 1 file changed, 34 insertions(+), 8 deletions(-) > > diff --git a/doc/org.bluez.MediaEndpoint.rst b/doc/org.bluez.MediaEndpoint.rst > index 0e201ff9d..11b7280bd 100644 > --- a/doc/org.bluez.MediaEndpoint.rst > +++ b/doc/org.bluez.MediaEndpoint.rst > @@ -24,14 +24,24 @@ Interface > Methods > ------- > > +.. _SetConfiguration: > + > void SetConfiguration(object transport, dict properties) > ```````````````````````````````````````````````````````` > > Set configuration for the transport. > > - For client role transport must be set with a server endpoint oject which > - will be configured and the properties must contain the following > - properties: > + :object transport: > + > + Configured transport object. > + > + :dict properties: > + > + Configured **org.bluez.MediaTransport(5)** properties. > + > + For client role transport must be set with a server endpoint > + object which will be configured and the properties must > + contain the following properties: > > :array{byte} Capabilities [Mandatory]: > > @@ -59,13 +69,29 @@ array{byte} SelectConfiguration(array{byte} capabilities) > dict SelectProperties(dict capabilities) > ```````````````````````````````````````` > > - Select configuration from the supported capabilities: > + Select BAP unicast configuration from the supported capabilities: > > - :object Endpoint [ISO only]: > - :Refer to SetConfiguration for the list of other possible properties.: > + :object Endpoint: > + :array{byte} Capabilities: > + :array{byte} Metadata: > + :uint32 Locations: The idea is these below are passed as in one container as in MediaEndpoint.QoS, looks like I missed changing the handling on pac_select since bluetoothctl doesn't check it but most likely pipewire does. > + :byte Framing: > + :byte PHY: > + :uint16 MaximumLatency: > + :uint32 MinimumDelay: > + :uint32 MaximumDelay: > + :uint32 PreferredMinimumDelay: > + :uint32 PreferredMaximumDelay: > > - Returns a configuration which can be used to setup a transport, see > - **org.bluez.MediaTransport(5)** for possible values. > + See `MediaEndpoint Properties`_ for their possible values. > + > + Returns a configuration which can be used to setup a transport: > + > + :array{byte} Capabilities: > + :array{byte} Metadata [optional]: > + :dict QoS: > + > + See `SetConfiguration`_ for their possible values. Interesting, need to check if the references works on manpages as well. > Note: There is no need to cache the selected properties since on > success the configuration is send back as parameter of SetConfiguration. > -- > 2.41.0 >
diff --git a/doc/org.bluez.MediaEndpoint.rst b/doc/org.bluez.MediaEndpoint.rst index 0e201ff9d..11b7280bd 100644 --- a/doc/org.bluez.MediaEndpoint.rst +++ b/doc/org.bluez.MediaEndpoint.rst @@ -24,14 +24,24 @@ Interface Methods ------- +.. _SetConfiguration: + void SetConfiguration(object transport, dict properties) ```````````````````````````````````````````````````````` Set configuration for the transport. - For client role transport must be set with a server endpoint oject which - will be configured and the properties must contain the following - properties: + :object transport: + + Configured transport object. + + :dict properties: + + Configured **org.bluez.MediaTransport(5)** properties. + + For client role transport must be set with a server endpoint + object which will be configured and the properties must + contain the following properties: :array{byte} Capabilities [Mandatory]: @@ -59,13 +69,29 @@ array{byte} SelectConfiguration(array{byte} capabilities) dict SelectProperties(dict capabilities) ```````````````````````````````````````` - Select configuration from the supported capabilities: + Select BAP unicast configuration from the supported capabilities: - :object Endpoint [ISO only]: - :Refer to SetConfiguration for the list of other possible properties.: + :object Endpoint: + :array{byte} Capabilities: + :array{byte} Metadata: + :uint32 Locations: + :byte Framing: + :byte PHY: + :uint16 MaximumLatency: + :uint32 MinimumDelay: + :uint32 MaximumDelay: + :uint32 PreferredMinimumDelay: + :uint32 PreferredMaximumDelay: - Returns a configuration which can be used to setup a transport, see - **org.bluez.MediaTransport(5)** for possible values. + See `MediaEndpoint Properties`_ for their possible values. + + Returns a configuration which can be used to setup a transport: + + :array{byte} Capabilities: + :array{byte} Metadata [optional]: + :dict QoS: + + See `SetConfiguration`_ for their possible values. Note: There is no need to cache the selected properties since on success the configuration is send back as parameter of SetConfiguration.